6.5BALANCING CAMERA AND LENS
1.Place the camera/lens/adapter plate on a flat surface. Place a pencil or other small round cylindrical item under the teleconferencing lens adapter plate as shown.
2.Move the camera/lens/adapter plate laterally, both left and right to determine the balance point of the assembly. This the point at which the assembly would rock easily on the pencil resembling a seesaw for children.
3.Using a small piece of masking tape or “post it note” mark the balance or pivot point on the lens.
4.Remove the pencil or pivot item.
BALANCE POINT
JVC
PENCIL
2/12/05 | 23 | Document D0153 |
|