Tilt Adjustment
View B illustrates the location of the Tilt Up and Tilt Down Limit Adjustments. With the camera mounted on the pan & tilt as shown in Figure 3, turn the system power “ON” and move the JOYSTICK up until the rear of the camera nears the bottom of the pan & tilt. Make sure the camera does not hit the pan & tilt when tilted fully up. If it does, DAMAGE COULD BE
Tilt Limit
Switch
+Adjustment
-
Video from
Camera
CAUSED TO THE SERVO MOTORS IN THE PAN & TILT HEAD OR TO THE CAMERA/LENS ASSEMBLY. If the camera rear does hit the pan & tilt head when fully positioned upward, readjust the “Tilt Limit Switch Adjustment” until the camera rear does not touch the pan & tilt head.
Move the JOYSTICK down until the front of the camera
nears the bottom of the pan & tilt. Make sure the camera
does not hit the pan & tilt when tilted fully down. IF IT
DOES, DAMAGE COULD BE CAUSED TO THE SERVO MOTORS IN THE PAN & TILT HEAD OR TO
THE CAMERA/LENS ASSEMBLY. If the camera front does hit the pan & tilt head when fully positioned
downward, readjust the “Tilt Limit Switch Adjustment” until the camera front does not touch the pan & tilt head.
2/12/05 | 9 | Document D0153 |
|