Panasonic F0707K0 -M, VQT1H84 Deleting text memos, Dividing and copying clips using text memos

Page 45
Move the cursor to the text memo to be deleted, and press [STILL].

Deleting text memos

1 Proceed with steps 1 to 4 in “Playback from text memo positions,” and select the text memos in the clips.

2

3 Press [MENU], and then select “OPERATION” – “DELETE” using [STOP], [PLAY] and [STILL].

4 Select “YES”, and press [STILL]. The text memo is now deleted.

Dividing and copying clips using text memos

1 Proceed with steps 1 to 4 in “Playback from text memo positions,” and select the text memos in the clips.

2 Move the cursor to the text memo to be copied, and press [STILL].

A multiple number of text memos can be selected.

3 Press [MENU], and then select “OPERATION” – “COPY” using [STOP], [PLAY] and [STILL].

4 Using [FF] or [REW] and [STILL], select the slot with the copy destination card, select “YES”, and press [STILL].

Copying is now executed.

•The block between the selected text memo and the next text memo is copied. If there is no text memo to follow the selected text memo, the selected block will be copied.

•While copying is underway, the progress made in copying and cancel are displayed. To stop the copying at any time, press [STILL]. The “YES/ NO” confirmation screen now appears. Using [STOP] and [STILL], select “YES”.

Replacing thumbnail images

The thumbnail display images of the clips to which text memos were added at the top of the LCD monitor screen can be replaced with still images to which the time stamps were added at the bottom of the screen.

1 Proceed with steps 1 to 4 in “Playback from text memo positions.”

2 Using [FF] or [REW], move the cursor to the still image to which the time stamp number has been added and whose thumbnail is displayed, and press [MENU].

3 Using [STOP], [PLAY] and [STILL], select “OPERATION” – “EXCH. THUMBNAIL”, and press [STILL].

4 Select “YES”, and press [STILL].

The thumbnail display is replaced with the selected still image.

•You can view the thumbnail change position (number of frames from the start) using the clip information display “THUMBNAIL” item (page 37). 0 is normally displayed for the thumbnail of the start frame.

•Playback from a thumbnail begins from the start of the clip even when the thumbnail has been changed.

Playback

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Memory Card Portable Recorder Operating InstructionsRead this first For Battery PackMemory Card Portable Recorder Rating plate is on the underside of the unitFCC Warning Declaration of ConformityNotification Canada For USA-California OnlySoftware information for this product Important Safety Instructions Contents Drive 1394 Host mode Drive USB Host modeBasic operations on the setting menus Setting menu configuration List of setting menusHow to use the unit Outputting the data to the external monitorFor playback AG-HPG10 this unit Hard drive P2 card Editing Editing by connecting the unit to a PCIntroduction AG-HPG10 this unit P2 cardAbout this manual ReferencesReferences are shown as Before use AccessoriesOperation area Name of the partsOutput CH 1 Audio CH Video HD/SD-SDI Component OUT Mechanism area and input/output connector areaConnect the AC cable to the power outlet Charging the batteryPower Charge ChargingInstalling and removing the battery Installing and removing the power supplyConnecting and disconnecting the power cable InsertionUsing the LCD monitor Turning the power on and offHold down Power for at least 2 seconds Basic operationsOperations performed when the function buttons are pressed Menu operationsPress Menu to exit the menu Basic operations Turn on the powerOperation modes Thumbnail display screenTurn the power off exit the PC mode PC modeLCD Color Level LCD monitor settingsLCD Brightness LCD ContrastPress Stop to move the setting item to Month Setting the calendarPress FF or REW to set Year to Press FF or REW to set Month to MAYP2 card access LED and P2 card status P2 cardsInserting P2 cards P2 card protection Formatting P2 cardsSelect YES on the confirmation screen, and press Still Selected P2 card is now formattedEjecting P2 cards P2 cardsCharging the internal battery Using the User buttonsConcerning P2 cards OtherPrecautions for using SD memory cards Using SD memory cardsInserting/ejecting SD memory cards Formatting SD memory cardsUsing Stop and PLAY, select WRITE, and press Still Using FF or REW, select the file number 1, 2, 3 orSaving User files on SD memory cards To re-load files from SD memory cardsThumbnail display Switching playback formatsPlayback formats Names and functions thumbnail display screen partsP2 card slot numbers and hard drive statuses Display statusesNames and functions of thumbnail display screen parts Thumbnail displayClips Changing the displays on the thumbnail display screenClips Slot Clips ExitSetting the items to be displayed Selecting clips Clip managementTo release the selection Deleting clipsRepairing defective clips Repairing and connecting clipsConnecting incomplete clips Clip managementCopying clips When the completion message has Appeared, press OK StillDisplaying the clip information Voice memo indicatorInformation on the selected clip now appears on the screen Information added to clipsClip information If necessary, reference the clip meta-data contentsClip meta-data Press MENU, and select Exit to exitEditing the clip information Displaying the P2 card status Inserting shot marks into clipsP2 card status Write-protect markP2 card remaining memory or used memory and total memory Slot remaining memory or used memory totalPress OK Still Press Menu to exit the procedure Displaying the SD memory card informationProxy recording is not possible with this unit Playing back clips Clip playbackRepeat playback Variable-speed searchesClip forward/reverse Rapid forward/rapid reverse playbackClip playback Press MENU, and then select Exit using STOP, Play and StillPlayback from text memo position Cursor moves hereDeleting text memos Dividing and copying clips using text memosReplacing thumbnail images Multiple number of text memos can be selectedOutputting images to an external monitor for playback Setting the outputsAudio OUT CH1 HD/SD-SDI OUTCMPNT/SDI SEL SET UPSDI OUT SDI MetadataRecording data on P2 cards For details, refer to setting menu Recording Setup screenInput recording Thumbnail screen appearsSlot continuous recording Resetting the counter valueTime code displays Waveform monitor displaysHard drive Type a Accessory Cable optional Copying data from P2 cards to the hard driveUSB cable optional To exit the Host mode Switching to the USB Host modeUsable hard drives Following hard drive can be usedCopying data from P2 cards to the hard drive USB Host mode Hard drive type Features Functions that can be usedTypes of hard drives and usable functions Formatting the hard drive Switch to the USB Host mode Connect the USB hard drive Exporting data to a hard drive in 1-card incrementsInsert the P2 card Press Menu Hard drive data display You can display the hard drive informationCharacters to the partition. dataSaving Page Importing one clip at a time to a P2 card Importing data from a hard drive to P2 cardsSwitching to the 1394 Host mode Using Stop and PLAY, select PROPERTY, and press Still Using Stop and PLAY, select the card slot, and press StillCopying data from P2 cards to the hard drive Hard drive status displaysEditing in the USB device mode Editing the P2 card data USB Device mode/1394 Device modeFor a Macintosh computer Connector Editing by means of external devicesEditing in the 1394 device mode Screen displays Normal displaysP2 Full Mark OFF Mark onText Memo InvalidScreen displays Cannot Access Card Cannot Access TargetTurn Power OFF Lack of REC CapacitySystem Error Error displaysREC Warning Cannot PlaySelecting what is to be displayed on the screen Mode CheckALL Partial OFF For system format 60 Hz regions List of recording/playback and output formatsFor 50 Hz system format regions Channels with the Dvcpro or DV formatRecorded Initializing the setting menu Basic operations on the setting menusPress Menu to display the menu. Example Press Still to set the itemCMPNT/SDI SEL SDI OUT Setting menu configurationRecording Setup screen List of setting menusUB Preset UB ModePreset UserSW Mode screen List of setting menusSetup AV OUT Setup screenPlayback Functions screen Repeat PlayDisplay Setup screen Card Functions screen Other Functions screen Language Power SaveEnglish JapaneseOption Menu screen Power-related Q&A Troubleshooting Q&ABattery-related Q&A For your referenceTroubleshooting Q&A RecordingEditing No hot swap playback PlaybackAC adapter and battery Operating precautionsWhen carrying the unit around, take care not to drop it Doing so may adversely affect the recorded images and soundAfter using the unit, always remember to remove the battery Characteristics of the batteryProtect the battery terminals Protective caps for the connectorsMaintenance Updating the drivers installed in the unitDo not use benzine or paint thinners to clean the unit CondensationBattery Storage precautionsUnit SD memory cardsHandling the data recorded on P2 cards Contents Audio Clip Icon Proxy Video Voice LASTCLIP.TXTCards that you can use Concerning the use of memory cardsCards that you cannot Use All memory cards except the ones shown on the leftSpecifications GeneralVideo Other INPUTS/OUTPUTS Audio Optional PeripheralsP2 Card Slots SD Card SlotEastern Zone Western ZoneTechnical Support

F0707K0 -M, AG-HPG10P, VQT1H84 specifications

The Panasonic VQT1H84, AG-HPG10P, and F0707K0-M are key components in Panasonic's lineup of professional solutions aimed at videographers and broadcasters. These products reflect Panasonic's commitment to innovation and quality in video capture and playback technologies.

The VQT1H84 is a comprehensive user manual for various Panasonic camcorders and audiovisual equipment. It serves as a crucial reference for users who seek to understand the intricate functionalities of their devices. The manual provides insights into settings, optimal configurations, and troubleshooting guidelines. It contains detailed explanations of key features like control menus, connectivity options, and audio settings. This resource ensures that operators can fully utilize their Panasonic products, enhancing the overall production quality.

The AG-HPG10P is a portable P2 HD portable recorder designed for professional broadcasting and digital cinematography. This compact model supports the P2 card format, allowing seamless integration of high-quality video and audio recording in various production environments. One significant feature is its dual codec capability, enabling the use of both AVC-Intra and MPEG-2 formats, which provides flexibility for different project requirements. The HPG10P also supports HDMI and SDI output, facilitating easy connection to external monitors and other equipment. Its robust design and high-capacity storage options make it ideal for on-location shoots and studio applications alike, ensuring that users can capture and playback detailed HD footage without compromising performance.

The F0707K0-M, on the other hand, typically refers to a specific part or accessory compatible with Panasonic's range of equipment. While details about this item may vary, it often pertains to the technical aspects of connectivity or enhancements in product performance. This could include components like cables, connectors, or supplementary tools designed to enhance the functionality of camcorders or recorders.

In summary, the combination of VQT1H84, AG-HPG10P, and F0707K0-M represents a cohesive ecosystem tailored for modern video production needs. With detailed user guidance, portable recording capabilities, and additional components for improved usability, Panasonic continues to establish itself as a leader in the audiovisual industry. Their commitment to quality and innovation ensures that professionals have the tools necessary to create stunning visual narratives.
Top Page Image Contents