Panasonic VQT1H84, F0707K0 -M, AG-HPG10P operating instructions Switching to the 1394 Host mode

• Connect the unit and the hard drive using the 1394 cable. Do not connect (using a chain or hub, for instance) a multiple number of hard drives even if no power is being supplied (to the chain or hub).

Copying data from P2 cards to the hard drive (1394 HOST mode)

Switching to the 1394 HOST mode		3.	Hard drive status	The status is displayed
1 Turn on the power of the hard drive (which			display	in white if the hard drive
				is connected and can be
				used, in black when it is
supports 1394. a SBP2) to be connected,				not connected, and in red
connect it to the unit using the IEEE1394				when data cannot be copied
cable, and hold down [POWER] on the unit				because of its formatting or
for at least 2 seconds to turn on its power.				other reasons. If you plan to
The thumbnail screen now appears.				copy data onto a hard drive
2 Press [MODE] to display the thumbnail				indicated in red, format the
				hard drive first.
	4.		Remaining	The remaining battery
display off screen.
3 Press [MENU].			battery charge	charge is displayed here.
	5.		Remaining hard	The remaining memory and
4 Using [STOP], [PLAY] and [STILL], select			drive memory	total memory of the hard
			display	drive are displayed here. “-/-”
“OTHER FUNCTIONS” – “PC MODE”, and				indicates that the hard drive
press [STILL].				is not connected.
5 Using [STOP] and [PLAY], select “1394	6.		Menu display	The menu used in the 1394
				HOST mode is displayed
HOST”, and press [STILL].				here.

6 Press [MENU] twice to display the thumbnail display off screen.

7 Press [MODE] to display the thumbnail display screen.

8 Hold down [MODE] for at least 2 seconds. The 1394 HOST mode screen now appears.

	1	2 3	4		Formatting the hard drive
				1 Using [STOP] and [PLAY], select “FORMAT
6					(HDD)”, and press [STILL].
					Then select “YES” using [STOP], and press
					[STILL]. Formatting now begins. (Formatting
					will be completed in about 2 or 3 seconds.)
				2 Select YES, and press [STILL].
				3 When the confirmation message appears
					again, select “YES”, and press [STILL].
						COPY TO HDD
	5
						FORMAT (HDD)
1.	Mode display	1394 HOST mode is
						PROPERTY
		displayed here.
						SETUP
2.	P2 card slot	The numbers of the P2 card
	number	slots where P2 cards have
		been inserted are displayed		Formatting now begins.
		in white.		• Bear in mind that all the data will be erased on

the hard drive being formatted.

58