Panasonic VQT1H84 Write-protect mark, P2 card status, Slot remaining memory or used memory total

Page 40

Clip management (continued)

Displaying the P2 card status (continued)

1)Write-protect mark

The mark is displayed when a P2 card is write-protected.

2)P2 card status

With the remaining memory display, the P2 card’s remaining memory is indicated using a meter and as a percentage. With the used memory display, the P2 card’s used memory is indicated using a meter and as a percentage. Depending on the status of the card, one of the following messages may be displayed.

FORMAT

An unformatted P2 card has

ERROR:

been inserted.

NOT

A card which is not supported

SUPPORTED:

by the unit has been inserted.

NO CARD:

A P2 card has not been

 

inserted.

3)P2 card remaining memory (or used memory) and total memory

The remaining memory (or used memory) and total memory of the P2 card are converted into minutes and displayed. Fractions of a minute are discarded so that the total of the remaining memory (or used memory) on each P2 card may not exactly correspond to the total memory.

4)Slot remaining memory (or used memory) total

A figure representing the total for the remaining memory (or used memory) of the cards in the two P2 card slots is displayed.

•The free memory of a write-protected P2 card is not included in the total free memory.

5)P2 card details display

When the cursor is moved to the slot whose P2 card status is displayed and [STILL] is pressed, the model number of the P2 card and other detailed information on the card will be displayed. When [STILL] is pressed again, the detailed information is cleared.

The card statuses are displayed as follows.

BRAND

: Panasonic

MODEL NO.

: AJ-P2C004HG

SERIAL NO.

: AEC06H0371

USED ID

:

 

 

 

 

OK

 

 

 

 

40

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Operating Instructions Memory Card Portable RecorderFor Battery Pack Read this firstMemory Card Portable Recorder Rating plate is on the underside of the unitDeclaration of Conformity FCC WarningNotification Canada For USA-California OnlySoftware information for this product Important Safety Instructions Contents Drive USB Host mode Drive 1394 Host modeBasic operations on the setting menus Setting menu configuration List of setting menusOutputting the data to the external monitor How to use the unitFor playback Editing Editing by connecting the unit to a PC AG-HPG10 this unit Hard drive P2 cardIntroduction AG-HPG10 this unit P2 cardReferences About this manualReferences are shown as Accessories Before useName of the parts Operation areaMechanism area and input/output connector area Output CH 1 Audio CH Video HD/SD-SDI Component OUTCharging the battery Connect the AC cable to the power outletPower Charge ChargingInstalling and removing the power supply Installing and removing the batteryConnecting and disconnecting the power cable InsertionTurning the power on and off Using the LCD monitorHold down Power for at least 2 seconds Basic operationsMenu operations Operations performed when the function buttons are pressedPress Menu to exit the menu Turn on the power Basic operationsOperation modes Thumbnail display screenPC mode Turn the power off exit the PC modeLCD monitor settings LCD Color LevelLCD Brightness LCD ContrastSetting the calendar Press Stop to move the setting item to MonthPress FF or REW to set Year to Press FF or REW to set Month to MAYP2 cards P2 card access LED and P2 card statusInserting P2 cards Formatting P2 cards P2 card protectionSelect YES on the confirmation screen, and press Still Selected P2 card is now formattedP2 cards Ejecting P2 cardsUsing the User buttons Charging the internal batteryConcerning P2 cards OtherUsing SD memory cards Precautions for using SD memory cardsInserting/ejecting SD memory cards Formatting SD memory cardsUsing FF or REW, select the file number 1, 2, 3 or Using Stop and PLAY, select WRITE, and press StillSaving User files on SD memory cards To re-load files from SD memory cardsSwitching playback formats Thumbnail displayPlayback formats Names and functions thumbnail display screen partsDisplay statuses P2 card slot numbers and hard drive statusesThumbnail display Names and functions of thumbnail display screen partsChanging the displays on the thumbnail display screen ClipsClips Slot Clips ExitSetting the items to be displayed Clip management Selecting clipsTo release the selection Deleting clipsRepairing and connecting clips Repairing defective clipsConnecting incomplete clips Clip managementWhen the completion message has Appeared, press OK Still Copying clipsVoice memo indicator Displaying the clip informationInformation on the selected clip now appears on the screen Information added to clipsIf necessary, reference the clip meta-data contents Clip informationClip meta-data Press MENU, and select Exit to exitEditing the clip information Inserting shot marks into clips Displaying the P2 card statusWrite-protect mark P2 card statusP2 card remaining memory or used memory and total memory Slot remaining memory or used memory totalDisplaying the SD memory card information Press OK Still Press Menu to exit the procedureProxy recording is not possible with this unit Clip playback Playing back clipsVariable-speed searches Repeat playbackClip forward/reverse Rapid forward/rapid reverse playbackPress MENU, and then select Exit using STOP, Play and Still Clip playbackPlayback from text memo position Cursor moves hereDividing and copying clips using text memos Deleting text memosReplacing thumbnail images Multiple number of text memos can be selectedSetting the outputs Outputting images to an external monitor for playbackAudio OUT CH1 HD/SD-SDI OUTSET UP CMPNT/SDI SELSDI OUT SDI MetadataFor details, refer to setting menu Recording Setup screen Recording data on P2 cardsInput recording Thumbnail screen appearsResetting the counter value Slot continuous recordingTime code displays Waveform monitor displaysCopying data from P2 cards to the hard drive Hard drive Type a Accessory Cable optionalUSB cable optional Switching to the USB Host mode To exit the Host modeUsable hard drives Following hard drive can be usedHard drive type Features Functions that can be used Copying data from P2 cards to the hard drive USB Host modeTypes of hard drives and usable functions Formatting the hard drive Exporting data to a hard drive in 1-card increments Switch to the USB Host mode Connect the USB hard driveInsert the P2 card Press Menu You can display the hard drive information Hard drive data displayCharacters to the partition. dataSaving Page Importing data from a hard drive to P2 cards Importing one clip at a time to a P2 cardSwitching to the 1394 Host mode Using Stop and PLAY, select the card slot, and press Still Using Stop and PLAY, select PROPERTY, and press StillCopying data from P2 cards to the hard drive Hard drive status displaysEditing the P2 card data USB Device mode/1394 Device mode Editing in the USB device modeFor a Macintosh computer Connector Editing by means of external devicesEditing in the 1394 device mode Normal displays Screen displaysP2 Full Mark on Mark OFFText Memo InvalidScreen displays Cannot Access Target Cannot Access CardTurn Power OFF Lack of REC CapacityError displays System ErrorREC Warning Cannot PlayMode Check Selecting what is to be displayed on the screenALL Partial OFF List of recording/playback and output formats For system format 60 Hz regionsChannels with the Dvcpro or DV format For 50 Hz system format regionsRecorded Basic operations on the setting menus Initializing the setting menuPress Menu to display the menu. Example Press Still to set the itemSetting menu configuration CMPNT/SDI SEL SDI OUTList of setting menus Recording Setup screenUB Mode UB PresetPreset UserList of setting menus SW Mode screenAV OUT Setup screen SetupPlayback Functions screen Repeat PlayDisplay Setup screen Card Functions screen Other Functions screen Power Save LanguageEnglish JapaneseOption Menu screen Troubleshooting Q&A Power-related Q&ABattery-related Q&A For your referenceRecording Troubleshooting Q&AEditing Playback No hot swap playbackOperating precautions AC adapter and batteryWhen carrying the unit around, take care not to drop it Doing so may adversely affect the recorded images and soundCharacteristics of the battery After using the unit, always remember to remove the batteryProtect the battery terminals Protective caps for the connectorsUpdating the drivers installed in the unit MaintenanceDo not use benzine or paint thinners to clean the unit CondensationStorage precautions BatteryUnit SD memory cardsContents Audio Clip Icon Proxy Video Voice LASTCLIP.TXT Handling the data recorded on P2 cardsConcerning the use of memory cards Cards that you can useCards that you cannot Use All memory cards except the ones shown on the leftGeneral SpecificationsVideo Audio Optional Peripherals Other INPUTS/OUTPUTSP2 Card Slots SD Card SlotWestern Zone Eastern ZoneTechnical Support

F0707K0 -M, AG-HPG10P, VQT1H84 specifications

The Panasonic VQT1H84, AG-HPG10P, and F0707K0-M are key components in Panasonic's lineup of professional solutions aimed at videographers and broadcasters. These products reflect Panasonic's commitment to innovation and quality in video capture and playback technologies.

The VQT1H84 is a comprehensive user manual for various Panasonic camcorders and audiovisual equipment. It serves as a crucial reference for users who seek to understand the intricate functionalities of their devices. The manual provides insights into settings, optimal configurations, and troubleshooting guidelines. It contains detailed explanations of key features like control menus, connectivity options, and audio settings. This resource ensures that operators can fully utilize their Panasonic products, enhancing the overall production quality.

The AG-HPG10P is a portable P2 HD portable recorder designed for professional broadcasting and digital cinematography. This compact model supports the P2 card format, allowing seamless integration of high-quality video and audio recording in various production environments. One significant feature is its dual codec capability, enabling the use of both AVC-Intra and MPEG-2 formats, which provides flexibility for different project requirements. The HPG10P also supports HDMI and SDI output, facilitating easy connection to external monitors and other equipment. Its robust design and high-capacity storage options make it ideal for on-location shoots and studio applications alike, ensuring that users can capture and playback detailed HD footage without compromising performance.

The F0707K0-M, on the other hand, typically refers to a specific part or accessory compatible with Panasonic's range of equipment. While details about this item may vary, it often pertains to the technical aspects of connectivity or enhancements in product performance. This could include components like cables, connectors, or supplementary tools designed to enhance the functionality of camcorders or recorders.

In summary, the combination of VQT1H84, AG-HPG10P, and F0707K0-M represents a cohesive ecosystem tailored for modern video production needs. With detailed user guidance, portable recording capabilities, and additional components for improved usability, Panasonic continues to establish itself as a leader in the audiovisual industry. Their commitment to quality and innovation ensures that professionals have the tools necessary to create stunning visual narratives.
Top Page Image Contents