Panasonic DMCLZ5K, DMC-LZ5 Inserting/Removing the Card Optional, Slide the card door to open it

Preparation

Inserting/Removing the Batteries

•Check that the camera is turned off and that the lens is retracted.

•Use oxyride batteries (supplied), alkaline batteries (optional) or Ni-MH batteries (optional).

1 Slide the battery door to open it.

2 Insert the batteries with the + and

-poles aligned correctly.

3 1 Close the battery door.

2Slide the battery door to the end and then close it firmly.

16

•Select the battery type being used in [BATTERY TYPE] in the [SETUP] menu. (P21)

•Remove the batteries after use.

•When batteries have been inserted for more than 3 hours, the clock setting is stored in the camera for approximately 3 months even if the batteries are removed.

•Do not remove the card or the batteries while the camera accesses the built-in memory or a card. The data may be damaged. (P17)

•Remove the batteries after the LCD monitor and the status indicator (green) turn off. Otherwise, the settings on the camera may not be stored properly.

Inserting/Removing the Card (Optional)

•Check that the camera is turned off and that the lens is retracted.

•You can record or play back pictures on the built-in memory when you are not using a card. (P17)

1 Slide the card door to open it.

VQT0U87