Panasonic DMC-LZ4, DMC-LZ5 Shutter speed for each flash setting Flash setting Sec, 30 to 1/2000

Advanced

•The available flash range is an approximation.

•Refer to P63 for the ISO sensitivity.

•Refer to P25 for the focus range.

•If ISO sensitivity is set to [AUTO] when using the flash, it will be automatically increased to a maximum of [ISO400].

•To avoid noise, we recommend decreasing the ISO sensitivity (P63) or setting [PICT.ADJ.] to [NATURAL]. (P68)

∫Shutter speed for each flash setting

	Flash setting		Shutter speed
			(Sec.)
		: AUTO	1/30 to 1/2000
		: AUTO/	1/30 to 1/2000
Red-eye reduction
		: Forced ON	1/30 to 1/2000
		: Forced ON/
Red-eye reduction
		: Slow sync./	1/8¢3 to 1/2000
Red-eye reduction
		: Forced OFF	1/8¢3 to 1/2000

¢3 The shutter speed changes depending on the slow shutter setting. (P67)

•There may be differences in the above shutter speeds in scene mode.

–[NIGHT SCENERY] (P51):

8 to 1/2000th

–[FIREWORKS] (P53): 1/4th, 1 second

–[STARRY SKY] (P53):

15 seconds, 30 seconds, 60 seconds

•Do not look directly at the flash at close range when it is activated.

•If you bring the flash too close to an object, the object may be distorted or discolored by the heat or lighting from the flash.

•Do not cover the photo flash with your fingers or other objects.

•While the flash is charged, the screen turns off and you cannot take pictures.

The status indicator lights. [Except when using the AC adaptor (DMW-AC6; optional).]

If the remaining battery power is low, the screen may be turned off for a longer period of time.

•If you press the shutter button halfway when the flash is activated, the flash icon turns red.

•When the jitter alert appears, we recommend using a tripod.

•When you take a picture beyond the available flash range, the exposure may not be adjusted properly and the picture may become bright or dark.

•When taking a picture with the flash, the white balance is automatically adjusted

[except for [ ] (Daylight)]. However, the white balance may not be properly

adjusted if the flash level is insufficient. (P62)

•When the shutter speed is fast, the flash effect may not be sufficient.

•If you repeat taking a picture, it may not actually be taken even if the flash is activated. Take a picture after the access indication disappears.

•The red-eye reduction effect differs between people. Also, if the subject was far away from the camera or was not looking at the first flash, the effect may not be evident.

•When you set burst mode or auto bracket, only 1 picture is recorded for every flash activated.

41

VQT0U87