Advanced (Recording pictures)
Recording a picture with the camera held high above your head (High angle mode)
The LCD monitor becomes easier to see when recording a picture with the camera held high above your head if the camera is held as shown in the following illustration.
This is useful when you cannot get close to the subject because there is a person in the way.
Press [HIGH ANGLE] A for 1 second.
3 | 3 |
HIGH | HIGH |
ON:PRESS ANGLE FOR 1 SEC. | ON:PRESS ANGLE FOR 1 SEC. |
B: High angle mode icon
•If you press [DISPLAY] for 1 second, High angle mode is activated. The LCD monitor C becomes brighter and easier to see when the camera is held away from you. (However it becomes more difficult to see when looked at straight on.)
∫Canceling High angle mode
Press and hold [HIGH ANGLE] again for 1 second or turn the camera off.
•High Angle mode is also canceled if power save mode is activated.
•Pictures are displayed on the LCD monitor with increased brightness in High angle mode. Therefore, some subjects may look different on the LCD monitor. However, this does not affect the recorded pictures.
•You may not notice the High angle mode effect if the LCD monitor is difficult to see because of light from the sun etc. shining on it. In this case, we recommend using your hand or another object to block the light when using the camera.
•High angle mode is not activated in the following cases:
–In simple mode [
]
–In playback mode
–In print mode [
]
–While the menu screen is displayed
–While the review screen is displayed
37
VQT1C39