Basic
∫Other Settings in Simple mode
In simple mode, other settings are fixed as follows. For more information about each setting, refer to the page indicated.
•Focus range:
50 cm (1.64 feet) to ¶ (Tele)
5 cm (0.16 feet) to ¶ (Wide)
•[AUTO REVIEW] (P20): [1SEC.]
•[POWER SAVE] (P21): [5MIN.]
•[ECONOMY] (P21): [OFF]
•
10 seconds
•Optical Image Stabilizer (P65): [MODE1]
•[W.BALANCE] (P60): [AWB]
•[SENSITIVITY] (P62):
This setting becomes the same as when the highest ISO sensitivity is set to [ISO800] in intelligent ISO sensitivity
mode [ ]. (P44)
•[ASPECT RATIO]/[PICT.SIZE]/[QUALITY]
(P62):
– [ ENLARGE]:
: (7M)/
–[ 4qk6q/10k15cm]:
: (2.5M EZ)/
–[
: (0.3M EZ)/
•[AF MODE] (P64): [ ]
•[AF ASSIST LAMP] (P66): [ON]
•You cannot use the following functions in simple mode.
–[GUIDE LINE]
–High angle mode
–Exposure compensation
–White balance fine adjustment
–[BURST]
–[D.ZOOM]
–[SLOW SHUTTER]
–[COL.MODE]
28
•You cannot set the following items in simple mode.
–[TRAVEL DATE]
–[WORLD TIME]
∫The Backlight Compensation Backlight refers to when light comes from the back of a subject.
In this case, the subject, such as a person, will become dark so this function compensates the backlight by brightening the whole of the picture.
Press 3.
•When the backlight compensation function is activated, [ ] (compensating backlight ON indication A) appears. Press 3 again to cancel the backlight compensation function.
3 | 3 |
BACKLIGHT | BACKLIGHT |
•We recommend using the flash when you use the backlight compensation function. (When using the flash, it is fixed to Forced ON [ ].)
•The flash setting is fixed to AUTO/
[OFF].
VQT1C39