Panasonic DMC-LZ7, DMC-LZ6 Some Pictures Cannot be COPIED/COPY could not be Completed

Page 98

Others

[CANNOT BE SET ON THIS PICTURE]/ [CANNOT BE SET ON SOME PICTURES]

The DPOF print cannot be set to the pictures not based on the DCF standard.

[NOT ENOUGH SPACE ON BUILT-IN MEMORY]/[NOT ENOUGH MEMORY IN THE CARD]

There is no space left on the built-in memory or the card.

When you copy pictures from the built-in memory to the card (batch copy), the pictures are copied until the capacity of the card becomes full.

[SOME PICTURES CANNOT BE COPIED]/[COPY COULD NOT BE COMPLETED]

The following pictures cannot be copied.

When a picture with the same name as the picture to be copied exists in the copy destination.

Files not based on the DCF standard. Moreover, pictures recorded or edited by other equipment may not be copied.

[BUILT-IN MEMORY ERROR FORMAT BUILT-IN MEMORY?]

This message will be displayed when you format the built-in memory on the PC etc. Format the built-in memory on the camera again. (P84) The data on the built-in memory will be deleted.

[MEMORY CARD ERROR FORMAT THIS CARD?]

The card format cannot be recognized by the camera. Format the card again with the camera after saving necessary data on a PC etc. (P84)

[PLEASE TURN CAMERA OFF AND THEN ON AGAIN]

This message appears when the lens is pressed with the hand etc. and the camera is not operating properly. Turn the camera off and on. If the message persists, contact the dealer or your nearest service center.

98

[MEMORY CARD PARAMETER ERROR]

Use a card compatible with this unit. (P5, 16)

You can only use an SDHC Memory Card if using cards with 4 GB or more capacity.

[MEMORY CARD ERROR PLEASE CHECK THE CARD]

An error has occurred accessing the card. Insert the card again.

[READ ERROR

PLEASE CHECK THE CARD]

An error has occurred reading the data. Insert the card again. Make sure the card is inserted properly and then play back again.

[WRITE ERROR

PLEASE CHECK THE CARD]

An error has occurred writing the data. Turn the camera off and remove the card. Insert the card again and turn the camera on. Make sure the camera is turned off before removing or inserting the card to avoid damage.

[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE WRITING SPEED OF THE CARD]

When you set the picture quality to [30fpsVGA] or [30fps16:9], we recommend using a High Speed SD Memory Card with “10MB/s” or greater displayed on the package.

Depending on the type of SD Memory Card or SDHC Memory Card, motion picture recording may stop in the middle.

VQT1C39

Image 98
Contents DMC-LZ6 Marking sign is located on bottom of the unit Information for Your SafetyDear Customer Model No Following Applies only in the U.S.AFCC Note Following Applies only in CanadaRead together with the Cautions for Use. P95 Care of the camera Do not strongly shake or bump the cameraPlaces with a lot of sand or dust About cards that can be used in this Unit Contents Setting color effects and picture quality Setting a picture size and quality thatFocusing in low light conditions Playing Back Motion Pictures Using the Play mode menuCards are optional Standard AccessoriesNames Components 10 11 13 14 Turn the camera on to take pictures Quick GuideInsert the batteries. P15 Play back the picturesAbout the Batteries When oxyride batteries are selectedWhen alkaline/Ni-MH batteries are selected Usable batteriesDo not heat or expose to flame Battery shapes that cannot be usedAll or part Pole is flat Covering on Battery is peeled Off When not using the batteries for a long period of time Recording conditions by Cipa standardPlayback time We recommend using Panasonic’s card Remove the batteries after useCard optional About the Built-in Memory/the Card optionalCard Http//panasonic.co.jp/pavc/global/csChanging the clock setting Setting Date/Time Clock SetInitial setting Press MENU/SET Press 3/4/2/1 to select the date and timeAbout the Mode Dial Press MENU/SET Setting the MenuPress 3/4 to select the setting Press 3/4 to select the menu itemPress 2 on the menu screen About the Setup MenuPress 4 to select the Setup menu icon World Time Power SaveEconomy MonitorDial Display NO.RESETReset LanguageLCD Monitor Display Switching the LCD Press the shutter button fully to take a picture When holding the camera vertically Flash AF assist lampTaking Pictures TeleTry the AF/AE lock technique or macro mode Color P60 Using the flashFocusing P26 Exposure P43Lock Preventing jitter camera shakeEnlarge Taking Pictures in Simple ModePICT.MODE MailZoom Other Settings in Simple modeYou cannot set the following items in simple mode Rotate the zoom lever towards Wide Taking Pictures with the ZoomRotate the zoom lever towards Tele Using the Easy zoom Setting to 7MPress MENU/SET to close the menu Further extending the zoomMenu operation ≥OFF W T ≥ON W TPress 2/1 to select the picture Checking the Recorded Picture ReviewPress 4 REV Rotate the zoom lever towards TTo delete a single picture Playing back picturesPlays back the previous picture Plays back the next picture While the picture is being deleted, appears on the screenPress Press 3 to select YES and then press MENU/SET to set Only when selecting Multi DeletePress 2/1 to select the picture and then press 4 to set To delete Multi DeletePlayback mode Simple modeRecording mode About the LCD MonitorExample of histograms Recording guide linesHistogram Canceling High angle mode Press High Angle a for 1 secondPress Press 3/4 to select a mode Available flash settings by recording Mode Auto ISO LimitShutter speed for each flash setting Flash setting Sec Taking Pictures with the Self-timer You can also press 2 to selectUnder exposed Compensating the ExposurePress MENU/SET to finish Compensate the exposure towards positivePress 3/4 to select the item and then press MENU/SET SettingsPress MENU/SET Press 3/4 to select ISO Limit and then press Focus range Taking Close-up PicturesFollowing functions cannot be used About the information Displaying the information screen of BABY1Technique for Portrait mode PortraitTechnique for Night portrait mode Use the flash Technique for Night scenery modeTechnique for Party mode Technique for Candle light modeAge display setting Birthday settingTaking Pictures Setting the shutter speedTechnique for Starry sky mode Turn the camera off when taking off or landing Technique for Fireworks modeTechnique for Aerial photo mode Press the shutter button fully to stop recording Motion Picture ModeWhen using the stabilizer function, it is fixed to MODE1 If you selected on the screen shown in stepYou cannot record audio. DMC-LZ6 Select the desired item Set the year, month and date Setting the departure/return dateNumber of days that have passed since the departure date Canceling the travel date Press MENU/SET to close the menu Take a pictureSetting the home area Home Displaying the Time at Travel Destination World TimeFinishing setting the home area Setting the travel destination areaUsing the REC Mode Menu Press and hold Func when recordingAWB Adjusting the hue for a more natural pictureBalance About the white balance fine adjustment Setting the white balance manuallyFinely adjusting the white balance About the white balanceSensitivity Setting the light sensitivitySetting the aspect ratio of pictures Aspect RatioPICT.SIZE/QUALITY AF Mode Setting the focus methodMODE1 StabilizerDetecting jitter and compensating for it MODE2AF Assist Lamp Focusing in low light conditions becomes easierBurst If the AF assist lamp isClock SET Slow ShutterCOL.MODE Recording bright pictures in dark placesDisplaying Multiple Press 3/4/2/1 to select a picture and then press MENU/ SET Displaying Pictures by Recording DatePress 3/4/2/1 to select the date to be played back To return to the 1 screen playback screenRotate the zoom lever towards T to enlarge the picture Using the Playback ZoomTo stop using the playback zoom To delete a picture during Playback zoomPress 2/1 while paused Playing Back Motion PicturesTo pause Using the Play mode menu Menu ScreenPress 3 to select Start and then press MENU/SET Slide ShowPress 3/4 to select ALL or and then press MENU/SET Press 4 to finishRotate DISP./ROTATE Setting your favorite picturesFavorite Deleting all favoritesRotate Picture is rotated manually Press 2/1 to select the picture and then pressPress MENU/SET twice to close the menu Motion pictures and protected pictures cannot be rotatedPress 3/4 to select YES or no and then press MENU/SET Date StampPress 3/4 to select Single or Multi and then press MENU/SET Travel Date P55SET Multi settingCancel Dpof Print Setting the picture to print and the number of printsTo cancel all settings Number of prints icon a appearsTo print the date Date print icon C appearsPress 2/1 to select the picture and then press 4 to Cancel The protect icon a disappearsProtect Preventing accidental erasure of picturesPress 2/1 to select the size and then press Picture size SettingResize Making the picture smallerTrimming Press shutter buttonPress MENU/SET several times to close the menu Only when is selectedCopy Copying the picture dataFormat Initializing the built-in memory or a cardWindows Connecting to a PCThis message appears during data transfer MacintoshAbout the PTP connection Folder CompositionConditions under which a different Folder number is used Connecting to other equipment Printing the Pictures Disconnect the USB connection cable after printing Press 2/1 to select the picture and then press MENU/SETPress 3 to select Print Start and then press MENU/SET Press Press 3/4 to select an item and then press MENU/SETPaper Size Print with Date OFFNUM. of Prints PostcardWhen printing different pictures on 1 sheet of paper Playing back pictures on a TV with an SD Memory Card slot Turn the TV on and select external input Turn the camera onSet the TV ASPECT. P22 Turn the camera and the TV off Screen Display Recording in normal picture mode Initial settingRecording after settings RecordingPlayback Recording in simple modePlayback mode P33 Number of Dpof prints P78Others Dispose of unusable batteries Bring charged spare batteries when going outAbout the Lens No Valid Picture to Play Message DisplayThis Memory Card is Locked This Picture is ProtectedMemory Card Parameter Error BUILT-IN Memory Error Format BUILT-IN MEMORY?Memory Card Error Format this CARD? Memory Card Error Please Check the CardFolder Cannot be Created TroubleshootingUSB Mode CHANGED. Please Remove the USB Cable Please RE-CONNECT the Printer100 101 Flash is activated twice 102Flash Flash is not activated You can rotate pictures with the Rotate function. P74103 104 Number of recordable pictures Number of Recordable Pictures and Available Recording Time105 106 Available recording time when recording motion pictures 107Specifications 108DIGITAL/V.OUT 109DIGITAL/AV OUT Digital Camera Accessory System 110For USA Customers Digital Camera Accessory Order Form111 Request for Service Notice For USA Only 112113 Limited Warranty For USA OnlyLimited Warranty Coverage Carry-In or Mail-In Service 114115 Customer Services Directory For USA OnlyCentralized Factory Service Center Personal ChecksPour le Canada Précautions à prendre116 117 Index 118Status Indicator Picture Quality Setting Motion PicturePicture Quality Setting 119Panasonic Canada Inc One Panasonic Way, Secaucus, NJPanasonic Puerto Rico, Inc Ambler Drive, Mississauga, Ontario, L4W 2T3