∫The flash is not activated
≥The flash cannot be activated in the following cases.
–When you set the flash to [Auto] or [Reduced red eye] in bright places
–When recording in [MPEG4] mode
≥ When you record pictures without using the flash, set the ISO sensitivity to adjust the brightness (P40).
≥If the subject is too close to the SD Multi Camera when taking a picture, the exposure may not be set properly and the picture may appear washed out.
≥You cannot record pictures even if you press the Shutter button while the flash mark turns red and blinks (while the flash is charged).
≥When you let subjects get too close to the flash, the shape or colour of subjects may be changed because of the heat and light of the flash.
35