Panasonic SV-AS3 operating instructions Messages displayed

Page 55

Do not use any other USB cables except the supplied one.

While printing or cancelling the print, do not disconnect the USB cable.

Do not replace the card while connecting with the printer. (Check that the printer is not printing anything and then disconnect the USB cable before replacing the card.)

Pictures recorded on other devices or altered on a PC may not be printed.

If you unplug the AC adaptor while connecting with the printer, operations of buttons on this unit will be disabled.

If the following messages appear during printing, check the printer and then select [Print resume] to restart printing or select [Print cancel] to stop printing. (If an irretrievable error takes place, only [Print cancel] will appear.) (Refer to the operating instructions of the printer you use.)

Messages displayed

NO PAPER

JAMMED PAPER

PRINTER ERROR

CHECK PRINTER

CHECK PRINTER

CHECK PRINTER

 

 

 

NO INK

PRINTER BUSY

 

CHECK PRINTER

CHECK PRINTER

 

 

 

 

When the error message of the printer is displayed before starting printing, you cannot operate anything except turning this unit off until the printer recovers.

55

VQT0Q47

Image 55
Contents Operating Instructions Contents 100 Connecting to PC OthersSpecifications End User License AgreementPreparation Information for Your SafetyVQT0Q47 Dear Customer Introduction357,594 297 AC adaptor Hand strap AccessoriesSD Memory Card is not included Battery Pack USB cable Cleaning ClothSuitable Card Optional AccessoryAbout SD Memory Card optional Body Controls LayoutCard Slot P13 21 22 Remote Controller P27Battery Lock Open P12 Stereo Earphones P60Close the Card/Battery Door Inserting/Removing the Battery or the CardOpen the Card/Battery Door at the bottom of this unit Insert/remove the battery or the cardLabel Notch When inserting the card/batteryWhen removing the card/battery Confirm the direction of the battery and the cardCharging the Battery Continuous Environment for chargingCharging time NumberBlinking Slide the Power Switch to onPower/Charge/Card Access Lamp Turning This Unit OnSwitching the Mode Battery indicatorSlide the Record/Playback Mode Switch to the desired mode Press the Jog Ball to set How To Set the MenuPress the Menu button Sub-menu screen appears Setting on the operation sound Setup MenuSetting on the Jog Ball Setting on the LCD Monitor Setting on the USB connectionSetting on the power Formatting initialising the card Setting on the clockRestoring the settings Setting the ClockPress the Menu button after adjusting the date and time Adjust the date and time with the Jog BallDpof print P56 Flash P34 Slide show P52 Night mode P38Shortcut Menu 11 12 13Before Recording How to hold the SD Multi CameraVoice Slide the Record/Playback Mode Switch to the recording modeRecording mode Recommendable situation Audio Picture RecordingPress the Shutter button to stop When selecting Picture Tap the Shutter button for recordingWhen recording in MPEG4 mode When recording in Picture modeWhen recording in Voice mode Approximate Number of Recordable Pictures and Time ≥ The time listed above tables are approximate 1600a 1200 1280a 960 640a 480 Changing the Picture Size and QualitySize and quality of the image recorded in MPEG4 Quality 2016a 1512Recording Zoom magnification Enlarging Pictures Digital ZoomPress the Jog Ball Roll the Jog Ball up or down to setFlash Setting the FlashAuto ≥ The flash cannot be activated in the following cases Flash is not activatedPicture Recording with the Self-timerSelf timer Press the Shutter button to take aSetting in the set mode Adjusting the Colour to Natural Tone White BalanceNight mode Recording in Dark Places Night ModePress the Jog Ball to set the exposure Manual adjustmentCompensating the Exposure Roll the Jog Ball left or right to compensate the exposureSensitivity Setting the ISO SensitivityDark places Still picture Slide the Record/Playback Mode Switch to the playback modePlayback Playback modes Playable files AudioPress the Jog Ball to start playback When selecting MPEG4 or VoicePress the Jog Ball to pause playback When playing in Voice mode Pictures Multi Playback Thumbnail Display Adjusting VolumeOne Playing Motion Images Repeatedly Repeat PlaybackDeleting Files RepeatPress the Menu button to exit this setting Select the files to be protected Preventing Accidental Erasure of Files Lock SettingWhen you release protection When you release protections on all filesRoll the Jog Ball up or down to select Enlarging Pictures Target ZoomZoom magnification and then Select the desired picture and then When you play files registered as Favourite onlyWhen you cancel registration Registering Still Pictures as FavouritePictures to create a slide show Playback When you cancel registration on all filesCreating a Slide Show with Audio Roll the Jog Ball left or right to selectJog Ball When you select Yes in StepSelect the audio file you want to play During the slide show and then press¿ mark Playing Still Pictures on the Slide ShowConnect this unit and the printer with AC adaptor and AC mains leadSupplied USB cable Start Print start Print starts To change the print settingChange Changes the print Settings Playback Select a picture and then press Jog BallMessages displayed When connecting in the recording mode When the battery is not insertedWhen the AC adaptor is not connected When the AC adaptor is unplugged duringWhen you confirm pictures with Dpof setting Only when Single print is selectedDesired file When you cancel Dpof setting Playback When you print the date in Dpof printingAudio File Playing MusicInsert a card which includes audio files Connect the remote controller and the stereo earphonesPlay music Desired music fileTo prevent operation mistakes on this unit When you switch the sound quality≥ Music files cannot be recorded or deleted on this unit Selecting PlaylistsPlaying Repeatedly Repeat Playback Operating environment for USB connection Operating Environment of the SoftwareOperating environment of the software Sound Connecting to PCVQT0Q47 When you install SD Viewer Before Connecting to a PC for the First Time InstallationStart the PC and insert the CD-ROM supplied Installing SD Viewer Installing the USB DriverClick I agree Installing SD-Jukebox Be sure to insert the charged Connecting to a PCPlayback mode Turn this unit on and set toAccessing PC indication Depending on the PC used Checking that This Unit Is Properly Recognised byDisconnecting the USB Cable Safely Folder name File name example Folder Structure of the Card Used for This UnitPlaying Copied Files Picture MPEG4 Using Files in a Card on a PC Picture MPEG4File type Software used for playing files Windows Macintosh Using SD Viewer Closing SD Viewer Select FileExit ≥ Using SD ViewerUsing SD-Jukebox Reading Operating Instructions of the Software Closing SD-JukeboxUninstalling the Software This Unit ≥ Be sure to use the supplied AC adaptor AC AdaptorBring spare batteries when you use this unit outdoors BatteryDo not throw unnecessary expired batteries into a fire Charging ErrorCondensation When the charge lamp turns offCauses of condensation LCD Monitor When condensation has taken placeRecorded Files CardBe sure to remove and store the card after use Format Demonstration ModeScreen Display on the Thumbnail Screen Screen DisplayScreen Display in Recording 3 4 5 6 7 10 11 12 13 1410 11 12 Screen Display in PlaybackScreen Display in Playing Music Messages Countermeasures MessagesTrouble Shooting Q&A Recording stops Question Answer Colour or BrightnessTake time to record onto a card depending on Record onto a cardQuestion Answer Flash cannot be When you record pictures with the flash, the whiteBalance may not be properly adjusted even if Properly adjusted when the flash light does notPictBridge PicturesWith printers SupportingQuestion Answer When this unit isAccess Lamp Properly installedSD Multi Camera SpecificationsAC adaptor Battery packMemo Article Article 1 License Article 2 Use by a Third PartyArticle Restrictions on Copying the Software Article 4 ComputerVQT0Q47