Preparation
Registering the unit
Registering the unit
Register the unit to your base unit. The unit will be assigned an extension number by your base unit.
Important:
LBefore registering this or any other compatible Panasonic units to your base unit, we recommend you change your base unit’s PIN so that other Bluetooth devices in the area are not accidentally registered at the same time. For more information, see the operating instructions included with your base unit.
1 Base unit:
Press and hold {INTERCOM} until it starts flashing and a beep sounds.
LAfter {INTERCOM} starts flashing, the rest of the procedure must be completed within 2 minutes.
2 Cordless video camera station (KX- THA16):
Press {OK} (F3), then wait until the unit beeps.
LIf you have changed the base unit’s PIN, enter it and press {OK}, then wait until the unit beeps.
Note:
LIf for some reason the unit is not registered to a base unit, use the following procedure to register it to the base unit.
{MENU} (F6) ixi{SELECT}
i“Registration” i{SELECT}
i“Registration” i{SELECT}
iRepeat step 1. i{OK}
If you have already canceled the unit’s registration at the previous base unit, follow steps 1 and 2.
Deregistering the unit
The unit can cancel its own registration.
1 {MENU} (F6) ixi{SELECT}
2 “Registration” i{SELECT}
3 “Deregistration” i{SELECT}
4 {3}{3}{5} i{OK}
Setting the unit before use
Display language
1
2
3 Select the desired setting. (Default: “English”)
4 Press the soft key (F6) to save. i {OFF}
Note:
LIf you select a language you cannot read, press the soft key (F6), {#}{1}{1}{0}{1}, and {SAVE} to change the display language to English.
For assistance, please visit http://www.panasonic.com/phonehelp | 17 |