HMonitoring
Video monitor
This feature allows the unit to monitor the image and sound of the room where the compatible Panasonic unit
Important:
LBefore you start monitoring, confirm that
the camera lens of the monitored unit has been adjusted to the correct angle.
LOnly 1 person can access to the cordless camera at a time.
Before using this feature, allow access to the destination unit by selecting “Permit” in the monitor access setting (page 35).
Monitoring the room 1 {MONITOR} (F5)
2 “Camera & Audio” i{SELECT}
3 Select the desired unit. i{SELECT}
LTo start/finish talking with the other party, press {2WAY}.
4 Press {OFF} to stop monitoring.
Note:
LWhen {Call button} of the cordless camera is pressed while monitoring the cordless camera with this unit, {2WAY} flashes on the display to notify you that the cordless camera is paging you. Press {2WAY} to answer the page.
Adjusting speaker volume Press {^} or {V} while monitoring.
Taking a picture of the displayed image while monitoring
Press {CAPTURE} when the desired image is displayed.
LA title is assigned to the image and the image is saved.
Note:
LTo view the image, see “Picture gallery” on page 41.
When paged from the cordless camera using the sensor (For
The unit can be paged from the cordless camera when the camera sensor detects motion and/or audio. Then you can answer the page to monitor the live video from the cordless camera.
And also, the cordless camera takes pictures (a total of 4 pictures, default) at the time of detection and stores them. You can view the images stored in the cordless camera using your unit, then select and save the desired images into your unit.
36For assistance, please visit http://www.panasonic.com/phonehelp