Useful Information
Direct command chart/programming index
Important:
LYou can program each feature directly by using feature codes.
Press {MENU}, {#}, then press the desired feature code.
Note:
LWhen you find “*1” or “*2” in the following table, refer to the corresponding note below. *1 If you program the following features using one of the units, you do not need to program
the same item using another unit.
*2 If you reset the base unit, the marked features are reset to their default settings. To reset the base unit, see its operating instructions.
Telephone
Feature | Feature | Default setting | Base | Page |
| code |
| reset*2 |
|
Appearance (Display color) | {1}{8}{2} | Color 1 | – | 45 |
Auto edit | {2}{1}{4} | On | r | 48 |
(Caller ID number auto edit) |
|
|
|
|
Background music | {1}{8}{6} | Off | – | 47 |
Caller list | {2}{1}{3} | – | – | 26 |
Customer support | {6}{8}{0} | – | – | 50 |
Customize ring | {1}{6}{6} | – | – | 43 |
Date and time*1 | {1}{0}{1} | 12.31.2006 | – | 47 |
Deregistration | {1}{3}{1} | – | – | 17 |
Display (Display language) | {1}{1}{0} | English | r | 17 |
Registration | {1}{3}{0} | – | – | 17 |
Interrupt tone | {2}{0}{1} | 2 | r | 44 |
Key tone | {1}{6}{5} | On | – | 48 |
LCD contrast | {1}{4}{5} | Level 5 | r | 45 |
(Display contrast) |
|
|
|
|
Line select | {2}{5}{0} | Auto | r | 48 |
Memory status | {6}{7}{0} | – | – | 49 |
Music volume | {1}{8}{7} | 2 | – | 47 |
Play list | {1}{8}{4} | – | – | 45 |
Play pattern | {1}{8}{3} | Sequential | – | 46 |
Phonebook | {2}{8}{0} | – | – | 21 |
Ringer tone | {1}{6}{1} | Line 1: Tone 1 | r | 42 |
|
| Line 2: Tone 2 |
|
|
|
|
|
|
|
For assistance, please visit http://www.panasonic.com/phonehelp | 77 |