| Useful Information |
|
|
Problem | Cause & solution |
The image sent from | LAdjust the display brightness setting (page 39). |
another compatible | LThere is a strong sunlight or a backlight in the place |
Panasonic unit (KX- | where the destination unit is located. Try shading the |
camera’s location. | |
| |
dark and difficult to see. |
|
|
|
I cannot connect to | LThe destination unit has lost communications with the |
another compatible | base unit. Move the destination unit closer to the base |
Panasonic unit (KX- | unit, and try again. |
LThere is an obstacle such as concrete wall. Move the | |
destination unit to the place without an obstacle. | |
image distorts, or the | LA microwave or wireless LAN appliance is in use. Move |
image is slow. | the destination unit closer to the base unit or use the |
| destination unit away from those appliances, and try |
| again. |
“Camera detect” is | LWhen you were paged from the cordless camera, you |
displayed. | were not near the unit and could not answer the page. |
| After you monitor the cordless camera which paged |
| you, the indication disappears. |
|
|
Answering system |
|
|
|
Problem | Cause & solution |
I cannot operate the | LAnother user is operating the answering system. |
answering system. | LIf other users are talking on a conference call, you |
| cannot operate the answering system. Try again later. |
|
|
|
|
Battery recharge |
|
|
|
Problem | Cause & solution |
I charged the battery fully, | LThe battery may need to be replaced with a new one |
but 3continues to | (page 12). |
flash, or 4is |
|
displayed. |
|
|
|
The display is blank. | LConfirm that the battery is properly installed. |
| LFully charge the battery (page 11). |
|
|
For assistance, please visit http://www.panasonic.com/phonehelp | 69 |