Text / Title Scroll, To scroll automatically

CD/External disc control features

English

Text / Title Scroll

This function permits the text to be scrolled and the entire text to be displayed. The scrolling method differs depending on the setting of scrolling in the menu.

To scroll automatically:

Press the DISP button to display the disc title or the track title. The display of the text will be scrolled repeatedly.

To scroll manually:

1Press the DISP button to display the disc title or the track title.

2Pressing the DISP button for at least one second results in one scrolling display of the titles.

NOTE

•Please see the menu settings (page 31) about switching between manual scrolling and automatic scrolling.

•Only units with a CD text feature permit title display.

•You cannot use the text scroll function during magazine random play.

Presetting Disc Names (DNPS)

Store the names of discs to be displayed when played.

1Play the disc whose name you want to preset.

NOTE

•This function is not available for disc changers that do not feature the Disc Name Preset function.

•The Disc Name Preset function cannot be used during the Magazine random play as well as while a disc title or track title is displayed.

2Press the NAME.S button for at least two seconds.

"NAME SET" is displayed and the disc name preset mode is entered.

The cursor blinks in the position where character input can be made.

3Press either the 4 or ¢ button to move the cursor to the desired position.

The 4 button moves the cursor to the left, and the ¢ button to the right.

4Each time the 38 button is pressed, the characters to be entered change as listed below.

Press the FM or AM button to display the desired character. Characters that can be displayed are as follows.

Alphabet (upper case): A ~ Z

Alphabet (lower case): a ~ z

Numerals and symbols: 0~9 @ ” ‘ ` % & ∗ + - = , . / \ < > [ ]

5Continue steps 3 and 4 until all the characters are chosen for the name.

NOTE

You can enter up to 12 characters for each name.

6Press the NAME.S button.

The disc name is stored and the disc name preset mode is canceled.

If you make no entry in a 10-second period, the name will be stored with the characters input so far.

NOTE

•The number of discs whose names can be stored will differ depending on the disc changer that is connected. Please see your disc changer manual for details.

Up to 30 CDs can be registered with this unit.

•Discs are identified by their total length and number of tracks. If another disc happens to have the same specifications as one that you have already stored a name for, the name will be displayed for it, too.

•If you want to change the name of a disc, repeat steps 1 and 2 to display the name, and then repeat steps 3 and 4 to input the changes.

— 22 —