Kenwood KDC-MP8017 instruction manual CD/External disc control features, Playing CDs

CD/External disc control features

English

FM 38 SRC 0

SCAN REP		DISP/ AM	Release
	NAME.S		button
RDM	M.RDM	4 ¢

Playing CDs

Playing CDs:

Press the release button to slide open the faceplate, showing the CD insertion slot.

Holding the CD with the labeled side facing up, insert it in the slot. The CD will start playing. Push back the bottom of the faceplate with your hand until it locks.

The IN indicator will light when a CD has been inserted.

2CAUTION

When inserting a CD, make sure the CD has been completely drawn in before pushing back the faceplate. Failing to do so might scratch the CD.

Playing CDs Already Inserted:

Press the SRC (source) button repeatedly to select the CD mode.

"CD" is displayed when the CD mode has been selected. The CD will start playing.

Pausing and Restarting CD Play:

				Press the 38 button to make the disc pause.
				Press the same button again to start play again.
	Track number	Track time	Disc number	Eject:
				Press the release button and slide open the faceplate.
				Press the 0 button.
				The CD stops playing and ejects from the slot.
				Push back the bottom of the faceplate with your hand until it
				locks.
				2CAUTION
IN indicator				• Do not attempt to insert a CD into the slot if another one is
				already there.
				• The unit can only play 5 in. CDs. If you insert a 3 in. CD, it will
				get stuck inside and can cause the unit to malfunction.
				• When the faceplate has been slid open, it might interfere with
				the shift lever or something else. If this happens, pay attention
				to safety and move the shift lever or take an appropriate action,
				then operate the unit.
				• Do not use the unit with the faceplate in the open condition.
				Doing so will cause breakdown.

— 18 —