Kenwood KDC-MP8017 instruction manual Removing the hard rubber frame, Removing the Unit

Page 35

Installation

■Removing the hard rubber frame

1Refer to the section “Theft deterrent faceplate (P. 14)” and then remove the faceplate.

2Engage the catch pins on the removal tool and remove the two locks on the upper level.

Push upward the frame and pull it forward as shown in the figure.

Lock Catch

Accessory3

Removal tool

3When the upper level is removed, remove the lower two locations.

NOTE

The frame can be removed from the bottom side in the same manner.

■Removing the Unit

1Refer to the section “Removing the hard rubber frame” and then remove the hard rubber frame.

2Remove the Hex-head screw with integral washer (M4⋅8) on the back panel.

3Insert the two removal tools deeply into the slots on each side, as shown.

Accessory6

Catch facing up

Accessory3

Removal tool

4Push upward the removal

tool toward the top, and pull out the unit halfway whilst pressing towards the inside.

2CAUTION

Be careful to avoid injury from the catch pins on the removal tool.

5Pull the unit all the way out with your hands, being

careful not to drop it.

— 35 —

Image 35

Contents KDC-MP8017 Contents 2Warning To prevent injury or fire, take the following precautions Safety precautionsLens Fogging Cleaning the CD SlotCleaning the Faceplate Terminals Cleaning the UnitChecking New CDs for Burrs Cleaning CDsHandling Compact discs Storing CDsDo Not Use CDs with Sticker on the Labeled Side Do Not Load CD AccessoriesRemoving the CD Do Not Use Special Shape CDsAcceptable medium formats Settings for your MP3 encoder and CD writerAcceptable media Entering file and folder namesWhen a folder search is executed with file being played When a file search is executed with file being playedSwitching Modes General featuresPower Loudness VolumeAttenuator Selecting mode Audio Control SettingSwitching the Preset Sound Setting Adjust each modeChanging the Clock Display Speaker SettingClock display Hiding the control panel Theft Deterrent FaceplateRemoving the Faceplate Reattaching the FaceplateTuner features Auto Memory Entry TuningStation Preset Memory Changing the Display Station Name Preset SnpsSwitching Display for Tuner Assigning NamesPlaying CDs CD/External disc control featuresSwitching Display for Discs Playing Other Disc modeSwitching Display for Discs Pausing and Restarting Disc PlayTrack / Disc Repeat Fast Forwarding and Reversing Disc PlayTrack Search Stopping to Listen to the Track Being Scanned Track ScanRandom Play Starting the Track ScanTo scroll manually Presetting Disc Names DnpsText / Title Scroll To scroll automaticallyMP3 player features File Search Playing MP3 FilesFast Forwarding and Reversing MP3 Play Folder SearchSelecting the desired folder Enter the Folder Select ModeFolder Select File / Folder RepeatName Scroll for MP3 Switching Display for MP3Switching Display for MP3 Security Code Menu settingsMenu System Touch Sensor Tone If you press the Reset button or remove the batteryDisplay and setting Selectable Illumination Manual Time AdjustmentSwitching Graphic Display Contrast AdjustmentText Scroll Reading the MP3 ID3 tag in MP3 modeSwitching the MP3 title information display Installation Procedure AccessoriesBattery + Connecting Wires to TerminalsInstalling in Japanese-Made Cars InstallationRemoving the Unit Removing the hard rubber frameLocking the faceplate to the unit Problem Possible Cause Solution Troubleshooting GuideEnglish CD/MP3/External disc control mode No Panel Audio section SpecificationsAM tuner section CD player sectionAnmerkung Disc Warranty Card WHO is Protected Kenwood IllllllIllIll11lllllI1111IIIllllllllllIii