Kenwood KDC-MP8017 Touch Sensor Tone, If you press the Reset button or remove the battery

Page 29

You must follow steps 1 to 8 to be able to use the Security Code function. Turning off the power during the procedure will deactivate the security code setting.

Once the security code function has been activated, "Security" disappears from the MENU system. Note that it will no longer be possible to cancel this function afterwards.

1Press the SRC button repeatedly to select the standby mode. "ALL OFF" is displayed when the standby mode is selected.

2Select the four digits to use in your security code.

NOTE

The four-digit security code is very important, as you will need it to turn the unit on again when the code security function is on. Choose the number carefully and do not forget it (write it down and keep it separately in a safe place).

3Press the MENU button for at least one second.

"MENU" is displayed first and then "Security" is displayed.

4Press either the 4 or ¢ button for at least one second. "ENTER" will appear in the display for one second, indicating the code setting mode has been entered. When "CODE" appears in the display, you can start inputting the code.

5Press the preset button and enter the security code that you have selected in step 2.

Example: Use "3510" as the security code.

Step

Button to press

# Times

Display

pressed

 

 

 

1

#1

4

“3”

2

#2

6

“5”

3

#3

2

“1”

4

#4

1

“0”

6Press the DISP button for at least three seconds. The security code will be set.

"RE-ENTER" will appear in the display for one second, asking you to enter the code once again for confirmation. When "CODE" appears in the display, you can start inputting the code.

7Press the Preset button and input the security code again.

8Press the DISP button again for at least three seconds. "APPROVED" will appear in the display, with the security code function turning on. From this point on, if the unit is disconnected from the battery, the security code must be entered the first time that the unit's power is turned on. "ENTER" and "CODE" will appear in the display, asking you to input the code.

NOTE

If you input an incorrect security code, the code setting mode will be canceled automatically. Follow the steps from 4 to 8 above again.

If you press the RESET button or remove the battery:

The first time you turn the unit on again, "CODE" will appear in the display, asking you to input the security code.

Repeat steps 7 and 8 above, and input the security code. You can start operating the unit again when "APPROVED" appears in the display.

If you enter the incorrect code, the power will turn off. Enter the correct code to turn the unit on.

Touch Sensor Tone

This function produces a beep sound that accompanies button operation. It can be switched on or off.

Display and setting:

"Beep ON" : Beep setting is on. (Default setting)

"Beep OFF" : Beep setting is off.

NOTE

The beep sound is not output from the preout jacks.

— 29 —

Page 28 Page 30
Image 29
Page 28 Page 30
Contents KDC-MP8017 Contents 2Warning To prevent injury or fire, take the following precautions Safety precautionsCleaning the Faceplate Terminals Cleaning the CD SlotCleaning the Unit Lens FoggingHandling Compact discs Cleaning CDsStoring CDs Checking New CDs for BurrsRemoving the CD Do Not Load CD AccessoriesDo Not Use Special Shape CDs Do Not Use CDs with Sticker on the Labeled SideAcceptable media Settings for your MP3 encoder and CD writerEntering file and folder names Acceptable medium formatsWhen a folder search is executed with file being played When a file search is executed with file being playedSwitching Modes General featuresPower Loudness VolumeAttenuator Switching the Preset Sound Setting Audio Control SettingAdjust each mode Selecting modeChanging the Clock Display Speaker SettingClock display Removing the Faceplate Theft Deterrent FaceplateReattaching the Faceplate Hiding the control panelTuner features Auto Memory Entry TuningStation Preset Memory Switching Display for Tuner Station Name Preset SnpsAssigning Names Changing the DisplayPlaying CDs CD/External disc control featuresSwitching Display for Discs Playing Other Disc modePausing and Restarting Disc Play Switching Display for DiscsTrack / Disc Repeat Fast Forwarding and Reversing Disc PlayTrack Search Random Play Track ScanStarting the Track Scan Stopping to Listen to the Track Being ScannedText / Title Scroll Presetting Disc Names DnpsTo scroll automatically To scroll manuallyMP3 player features File Search Playing MP3 FilesFast Forwarding and Reversing MP3 Play Folder SearchFolder Select Enter the Folder Select ModeFile / Folder Repeat Selecting the desired folderName Scroll for MP3 Switching Display for MP3Switching Display for MP3 Security Code Menu settingsMenu System Touch Sensor Tone If you press the Reset button or remove the batteryDisplay and setting Switching Graphic Display Manual Time AdjustmentContrast Adjustment Selectable IlluminationText Scroll Reading the MP3 ID3 tag in MP3 modeSwitching the MP3 title information display Installation Procedure AccessoriesBattery + Connecting Wires to TerminalsInstalling in Japanese-Made Cars InstallationRemoving the Unit Removing the hard rubber frameLocking the faceplate to the unit Problem Possible Cause Solution Troubleshooting GuideEnglish CD/MP3/External disc control mode No Panel AM tuner section SpecificationsCD player section Audio sectionAnmerkung Disc Warranty Card WHO is Protected Kenwood IllllllIllIll11lllllI1111IIIllllllllllIii
Top Page Image Contents