Panasonic HXA100K, HX-A100K, HXA100D Wearing this unit, Fasten to your arm, About the Armband Case

Page 14

Preparation

Preparation

Wearing this unit

Wear the main unit and camera unit.

≥If you have felt discomfort after a long period of use, stop the use or loosen the tight fit by slightly loosening the adjuster, etc.

≥For the direction of the camera, check the actual image on the Live view screen.

Camera unit

Main unit

Fastening the main unit using the Armband Case
1 Insert so that you can see the	2 If the band is not long enough,
buttons on the main unit.	attach the extended band C.
		

		
	A: Hook and loop fastener
	≥ Attach by passing the tip of the armband
	through the buckle portion B of the extended
3 Fasten to your arm.	band.
	∫ About the Armband Case

≥When fastening the main unit, try not to drop the camera unit to avoid a shock and try not to scratch the lens.

The Armband Case can be used as a portable holder.

≥When fastening to your arm, remove the camera unit from the armband case.

≥When removing the camera/main unit from the Armband Case, avoid pulling the camera/main unit connection cable.

≥You can use an optional Multi Mount (VW-MKA100) for a variety of scenes.

14

VQT4X87

Image 14

Contents Wearable Camera Dear Customer Following Applies only in the U.S.A FCC NoteContains FCC ID VPYLBVX532 Contains IC 772C-LBVX604Important Safety Instructions If you see this symbol About connecting to a PCContents Important About the Waterproof/ Dustproof Handling of this unitWhat to do when inner side of the lens is fogged When inner side of the lens is fogged condensationCheck before using underwater Slide the side cover downward to open itUsing this unit underwater Caring for this unit after using it underwaterAccessories  Read this first What you can do with this unit Playback on DLNA-compatible devicesAbout the Armband Case Wearing this unitFasten to your arm  Unlock How to remove CameraHow to attach the adjuster Large Supplied Power supply Charging the batteryCharging and recording time Check that the access lamp a has gone off Recording to a cardTurn this unit on/off About the access lampPress the power button to turn on this unit To turn off this unitBefore use Wi-FifunctionUse this unit as a wireless LAN device Connecting with a WPS-compatible smartphone Press and hold the Wi-Fi/WPS button for 3 seconds or more≥ Password entry screen is displayed Set the Wi-Fi function to on on the smartphone setup menuEnter password below Selecting Ssid of this unit to connect with a smartphoneWhen connecting by If the device is Android Setting up with Setup WizardChange the Ssid and password for this unit Tap Tap the wireless access point to connect Enter passwordSetting date and time Tap # Camera setup Tap Date & timeTap the motion picture recording icon to start RecordingTap About recording with this unitTo copy the data stored in this unit to the smartphone Copy using Picture Share settingsPlayback Recording modes/approximate recordable time Approximate number of recordable picturesThis may cause leaking, overheating, fire or rupture Requests when disposing of this unitBattery used for this unit Keep removed screws etc. out of the reach of small childrenHow to remove the battery Regarding the handling of used batteriesSpecifications Optional accessories Accessory No DescriptionLicenses About copyrightCarefully observe copyright laws Accessory Order Form For USA and Puerto Rico Customers VisaPanasonic Products Limited Warranty Limited Warranty Limits And Exclusions For hearing or speech impaired TTY users, TTYWarranty For Canadian Customers Panasonic Canada Inc01-8000-94PANA PanaVQT4X87 VQT4X87 Panasonic Canada Inc