Panasonic HXA100K, HX-A100K, HXA100D owner manual Charging and recording time

Page 17

Charging and recording time

∫Charging/Recording time

≥Temperature: 25 oC (77 oF)/humidity: 60%RH

Charging time

Recording mode

Maximum continuous

Actual recordable

recordable time

time

 

 

 

1920k1080/60p

1 h 50 min

55 min

 

1920k1080/30p

2 h 20 min

1 h 10 min

 

1280k720/60p

2 h 5 min

1 h 5 min

4 h 30 min

1280k720/30p

2 h 35 min

1 h 20 min

640k360/30p

2 h 45 min

1 h 25 min

 

 

1920k1080/60fps

1 h 50 min

55 min

 

1280k720/120fps

2 h 5 min

1 h 5 min

 

640k360/240fps

2 h 20 min

1 h 10 min

≥These times are approximations.

≥The indicated charging time is for when the battery has been discharged completely. Charging time and recordable time vary depending on the usage conditions such as high/low temperature.

≥The actual recordable time refers to the recordable time when repeatedly starting/stopping recording, turning this unit on/off, etc.

≥The main unit heats up after use or charging. This is not a malfunction.

≥The power lamp flashes (Flashing with approx. 0.5 second period) when the remaining battery time becomes low. The remaining battery capacity is displayed on the screen when using Image App (l 21).

≥For information about charging with a mobile USB charger or an AC adaptor, check the support site.

http://panasonic.jp/support/global/cs/e_cam/index.html (This site is English only.)

THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA.

The power plug is the disconnecting device. Install this unit so that the power plug can be unplugged from the socket outlet immediately.

THE FOLLOWING APPLIES ONLY IN LATIN AMERICAN COUNTRIES.

The mains plug is the disconnecting device. Install this unit so that the mains plug can be unplugged from the socket outlet immediately.

When the Power lamp is flashing during charging

Flashing with approx. 0.5 second period (off for approx. 0.25 second, on for approx. 0.25 second):

≥Check that the USB terminals of this unit or the connecting device, such as PC are not dirty or covered with a foreign object, and reconnect correctly. If a foreign object or dirt is present, turn off this unit before removing.

≥The environment is at an extremely high or low temperature. Wait until the temperature has returned to an appropriate level and try charging again. If you are still unable to charge, there may be a fault in this unit or the connecting device.

Flashing with approx. 2 second period (off for approx. 1 second, on for approx. 1 second): During charging normally (l 16)

Flashing with approx. 4 second period (off for approx. 2 seconds, on for approx. 2 seconds):

≥When the battery is over discharged or the temperature of the battery is too high or low. It can be charged, but it may take a few hours to complete the charging normally.

≥It will flash in approx. 2 second intervals when normal charging resumes. Even in such cases, it may start flashing in approx. 4 second intervals until charging is completed depending on the conditions of use.

17

VQT4X87

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Wearable Camera Dear Customer FCC Note Following Applies only in the U.S.AContains IC 772C-LBVX604 Contains FCC ID VPYLBVX532Important Safety Instructions About connecting to a PC If you see this symbolContents Handling of this unit Important About the Waterproof/ DustproofCheck before using underwater When inner side of the lens is fogged condensationWhat to do when inner side of the lens is fogged Slide the side cover downward to open itCaring for this unit after using it underwater Using this unit underwater  AccessoriesRead this first Playback on DLNA-compatible devices What you can do with this unitAbout the Armband Case Wearing this unitFasten to your arm  Unlock How to remove CameraHow to attach the adjuster Large Supplied Charging the battery Power supplyCharging and recording time Recording to a card Check that the access lamp a has gone offPress the power button to turn on this unit About the access lampTurn this unit on/off To turn off this unitBefore use Wi-FifunctionUse this unit as a wireless LAN device Press and hold the Wi-Fi/WPS button for 3 seconds or more Connecting with a WPS-compatible smartphoneEnter password below Set the Wi-Fi function to on on the smartphone setup menu≥ Password entry screen is displayed Selecting Ssid of this unit to connect with a smartphoneChange the Ssid and password for this unit Setting up with Setup WizardWhen connecting by If the device is Android Tap Tap the wireless access point to connect Enter passwordTap # Camera setup Tap Date & time Setting date and timeTap RecordingTap the motion picture recording icon to start About recording with this unitTo copy the data stored in this unit to the smartphone Copy using Picture Share settingsPlayback Approximate number of recordable pictures Recording modes/approximate recordable timeBattery used for this unit Requests when disposing of this unitThis may cause leaking, overheating, fire or rupture Keep removed screws etc. out of the reach of small childrenRegarding the handling of used batteries How to remove the batterySpecifications Accessory No Description Optional accessoriesLicenses About copyrightCarefully observe copyright laws Visa Accessory Order Form For USA and Puerto Rico CustomersPanasonic Products Limited Warranty For hearing or speech impaired TTY users, TTY Limited Warranty Limits And ExclusionsPanasonic Canada Inc Warranty For Canadian CustomersPana 01-8000-94PANAVQT4X87 VQT4X87 Panasonic Canada Inc
Top Page Image Contents