Panasonic HXA100D, HX-A100K, HXA100K Recording, Tap the motion picture recording icon to start

Page 25

Basic

Basic

Recording

Record motion pictures or still pictures using the smartphone as a remote control.

≥For details, refer to the help of the Image App.

Preparation: Connect this unit with the smartphone and start Image App. (l 21)

1080/30p

Angle of view

Select Standard or Wide mode.

Motion picture recording icon

Live view

Displays an image from the camera of this unit.

≥Also outputs sound from the microphone of this unit.

XXXXX

Still picture recording icon

Recording motion pictures

1 Tap .

≥This unit is set to the recording mode.

2 Tap the motion picture recording icon to start.

≥Starts recording.

3 Tap the motion picture recording icon again to stop recording.

≥Stops recording.

Recording still pictures

1 Tap .

≥This unit is set to the recording mode.

2 Tap the still picture recording icon to record still picture.

≥Updating Live view images may stop while recording still pictures.

∫About recording with this unit

You can record images using this unit without any connection with this unit, turning the Wi-Fi mode off.

≥Motion pictures and still pictures cannot be recorded at the same time.

Recording start/ stop button

Photoshot button

25

VQT4X87

Image 25

Contents Wearable Camera Dear Customer FCC Note Following Applies only in the U.S.AContains IC 772C-LBVX604 Contains FCC ID VPYLBVX532Important Safety Instructions About connecting to a PC If you see this symbolContents Handling of this unit Important About the Waterproof/ DustproofCheck before using underwater When inner side of the lens is fogged condensationWhat to do when inner side of the lens is fogged Slide the side cover downward to open itCaring for this unit after using it underwater Using this unit underwater  AccessoriesRead this first Playback on DLNA-compatible devices What you can do with this unitFasten to your arm Wearing this unitAbout the Armband Case How to attach the adjuster Large Supplied How to remove Camera Unlock Charging the battery Power supplyCharging and recording time Recording to a card Check that the access lamp a has gone offPress the power button to turn on this unit About the access lampTurn this unit on/off To turn off this unitUse this unit as a wireless LAN device Wi-FifunctionBefore use Press and hold the Wi-Fi/WPS button for 3 seconds or more Connecting with a WPS-compatible smartphoneEnter password below Set the Wi-Fi function to on on the smartphone setup menu≥ Password entry screen is displayed Selecting Ssid of this unit to connect with a smartphoneChange the Ssid and password for this unit Setting up with Setup WizardWhen connecting by If the device is Android Tap Tap the wireless access point to connect Enter passwordTap # Camera setup Tap Date & time Setting date and timeTap RecordingTap the motion picture recording icon to start About recording with this unitPlayback Copy using Picture Share settingsTo copy the data stored in this unit to the smartphone Approximate number of recordable pictures Recording modes/approximate recordable timeBattery used for this unit Requests when disposing of this unitThis may cause leaking, overheating, fire or rupture Keep removed screws etc. out of the reach of small childrenRegarding the handling of used batteries How to remove the batterySpecifications Accessory No Description Optional accessoriesCarefully observe copyright laws About copyrightLicenses Visa Accessory Order Form For USA and Puerto Rico CustomersPanasonic Products Limited Warranty For hearing or speech impaired TTY users, TTY Limited Warranty Limits And ExclusionsPanasonic Canada Inc Warranty For Canadian CustomersPana 01-8000-94PANAVQT4X87 VQT4X87 Panasonic Canada Inc