Power supply
Charging the battery
When this unit is purchased, the battery is not charged. Charge the battery fully before using this unit for the first time.
≥This unit has a
≥The battery will not be charged if this unit is turned on. Connect it with the PC to charge the battery after turning it off.
≥It is recommended to charge the battery in a temperature between 10 oC and 30 oC (50 oF and 86 oF).
B
C
A
A: LOCK switch
B: USB cable (supplied)
C: Unlocked when the red indicator is visible
1 Slide A to the left to unlock the side cover and slide the side cover downward to open it.
2 Connect the USB terminal of this unit to a PC with the USB cable B (supplied).
≥Insert the USB cable securely all the way.
≥The Power lamp will flash red at an interval of 2 seconds (approximately 1 second on, 1 second off), indicating that charging has begun.
It will turn off when the charging is completed.
≥Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.)
≥Do not heat or expose to flame.
≥Do not leave the unit (including
≥If operating time is short even after fully charging the battery, the battery is worn out and needs to be replaced. Please contact your dealer.
≥When the PC is in a power saving mode such as a standby state, the battery may not be charged. Cancel the power saving mode, and connect this unit again.
≥Operation is not guaranteed when devices are connected through USB hubs or by using extension cables.
≥Operation cannot be guaranteed on all devices having a USB terminal.
16
VQT4X87