Panasonic HX-A500 owner manual Inserting/removing a microSD card

Page 17

Inserting/removing a microSD card

When using a microSD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the microSD card. (l 19) When the microSD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored.

Caution:

Check that the access lamp has gone off.

	A Access lamp
	≥ When this unit is accessing the
	microSD card (such as
	recognition, recording, playback
	and deletion), the access lamp
	lights up.
	B LOCK switch
	C Unlocked when the red
	indicator is visible





1 Slide the LOCK switch to the left to unlock the side cover and slide the side cover downward to open it and then insert (remove) the microSD card into (from) the card slot.

≥Face the terminal side D upward and press it straight in as far as it will go.

≥Press the center of the microSD card and then pull it straight out.

2 Close the side cover and slide the LOCK switch to the right to lock it.

≥Close the side cover and slide it upward and then lock it.

≥Securely lock it until it clicks.

17

(ENG) SQT0251

Image 17

Contents Https//eww.pavc.panasonic.co.jp/hdw/oi/A500 Wearable CameraDear Customer FCC Note Following Applies only in the U.S.AImportant Safety Instructions Contains IC 772C-LBVX604 Contains FCC ID VPYLBVX532About connecting to a PC If you see this symbolContents Handling of this unit Important About the Waterproof/ DustproofOpen the side cover Check before using underwaterIf there is foreign matter adhering to the unit, remove it Close the side cover securelyRinse with water with the side cover closed Using this unit underwaterCaring for this unit after using it underwater Read this first Cards that you can use with this unit AccessoriesLive broadcasting What you can do with this unitPlayback on DLNA-compatible devices DLNA-compatible devicesCharging the battery Power supplyCharging/Recording time Battery capacity indicationCharging and recording time Recording to a card When the Power lamp is flashing during chargingCards that you can use with this unit OffInserting/removing a microSD card Check that the access lamp has gone off Access lampPress the power button to turn on this unit Setting date and timeTurning this unit on/off To turn off this unitLanguage selection Using the menu screenFormatting Press the joystickWearing this unit Fastening the main unit using the Armband CaseBefore recording Pass the band through the band hole About the Armband CaseCable holder Things to check after putting on this unit How to remove the cameraRecording Changing the Recording ModePress the recording start/stop button Press the joystick to select the menuTap Playback using a smartphoneInstall the Image App Wi-FifunctionThis unit is NFC-compatible Connect your Android Connect your iOSIf the device is Android NFC-compatible Preparations before using remote operationIf the device is Android non-NFC-compatible or iOS Start up the smartphone application Image AppSelect YES, then press the joystick If the Wi-Fi connection cannot be establishedReset Wi-Fi settings Long enough TroubleshootingIt is not a malfunction in following cases Battery used for this unit Requests when disposing of this unitThis may cause leaking, overheating, fire or rupture Keep removed screws etc. out of the reach of small childrenRegarding the handling of used batteries How to remove the batteryRemove the battery by using a screwdriver Specifications Battery operation time Optional accessoriesWireless transmitter Operating humidityLicenses About copyrightCarefully observe copyright Laws ENG SQT0251 Visa Accessory Order Form For USA CustomersPanasonic Products Limited Warranty Limited Warranty only for U.S.AAs of April Warranty For Canadian Customers Panasonic Corporation of North America