Panasonic HX-A500 owner manual If the Wi-Fi connection cannot be established, Reset Wi-Fi settings

If the Wi-Fi connection cannot be established

≥Please refer to the operating instruction of the device in use for details about the setting of the wireless access point or smartphone.

Problem	Check points
The Wi-Fi connection is	≥ Make sure the smartphone is properly connected to this unit
not possible between this	by checking the Wi-Fi settings of the smartphone.
unit and a smartphone.	≥ Make sure the SSID and Password have been correctly input.
	≥ Make sure the smartphone is not connected to the wireless
	access point. If it is connected to the wireless access point,
	change the Wi-Fi access point using the smartphone’s Wi-Fi
	set up.
It takes long time every	≥ It may take longer time to connect depending on the Wi-Fi
time to connect to a	connection setting of the smartphone, but it is not a
smartphone.	malfunction.
This unit is not displayed	≥ Try switching the on/off of the Wi-Fi function in the Wi-Fi
in the Wi-Fi setting screen	settings of the smartphone.
of the smartphone.
The Wi-Fi connection is	≥ If there is a setting for avoiding poor connections in the Wi-Fi
disconnected immediately.	setting menu of the Android device 4.0 or later version, turn it
	off.
Cannot be connected	≥ Make sure your smartphone is compatible with NFC. This unit
using NFC.	can be used with NFC-compatible terminals via Android (OS
	version 2.3.3 or later).
	≥ Make sure the NFC function of your smartphone is on.
	≥ Make sure this unit is turned on.
	≥ Some smartphones cannot be easily checked simply by
	touching. If this unit is not recognized even after touching,
	change positions and try again by touching slowly.
	≥ Touch again if it does not connect after touch.
	If a connection still cannot be established, shut down the
	“Image App”, turn off this unit and try to establish a
	connection again.
	≥ If the amount of time this unit is in contact with the
	smartphone is too short, this unit may not recognize the
	smartphone. Touch and hold the smartphone.

Reset Wi-Fi settings

You can change the Wi-Fi setting back to the default condition. The “LUMIX CLUB” Login ID can also be deleted.

1 Press the joystick to select the menu.

[Wi-Fi SETUP] # [RESET Wi-Fi SETTINGS] # [YES]

2(To delete the Login ID of the “LUMIX CLUB”)

Select [YES], then press the joystick.

28

SQT0251 (ENG)