Panasonic HX-A500 Turning this unit on/off, Setting date and time, To turn off this unit

Page 18

Preparation

Turning this unit on/off

Press the power button to turn on this unit.

The power lamp is turned on.	To turn off this unit

Hold down the power button until the power lamp goes off.

Preparation

Setting date and time

The clock is not set at the time of purchase. Make sure to set the clock.

1 Press the joystick to select the menu. (l 19)

[SETUP] # [CLOCK SET]

2 Move the joystick right or left to select the date to be set, then move the joystick up or down to select the desired value.

≥Press the joystick or recording start/stop button to enter the selection.

≥The year can be set between 2000 and 2039.

3 Move the joystick right or left to select the time to be set, then move the joystick up or down to select the desired value.

≥Press the joystick to enter the selection.

4 Press the recording start/stop button to complete the setting.

≥When the unit is turned on for the first time, a message asking you to set the date and time will appear. Select [YES] and perform Steps 2 to 3 to set the date and time.

18

SQT0251 (ENG)

Image 18

Contents Wearable Camera Https//eww.pavc.panasonic.co.jp/hdw/oi/A500Dear Customer Following Applies only in the U.S.A FCC NoteImportant Safety Instructions Contains FCC ID VPYLBVX532 Contains IC 772C-LBVX604If you see this symbol About connecting to a PCContents Important About the Waterproof/ Dustproof Handling of this unitIf there is foreign matter adhering to the unit, remove it Check before using underwaterOpen the side cover Close the side cover securelyUsing this unit underwater Caring for this unit after using it underwaterRinse with water with the side cover closed Read this first Accessories Cards that you can use with this unitPlayback on DLNA-compatible devices What you can do with this unitLive broadcasting DLNA-compatible devicesPower supply Charging the batteryBattery capacity indication Charging and recording timeCharging/Recording time Cards that you can use with this unit When the Power lamp is flashing during chargingRecording to a card OffCheck that the access lamp has gone off Access lamp Inserting/removing a microSD cardTurning this unit on/off Setting date and timePress the power button to turn on this unit To turn off this unitFormatting Using the menu screenLanguage selection Press the joystickFastening the main unit using the Armband Case Before recordingWearing this unit About the Armband Case Pass the band through the band holeCable holder How to remove the camera Things to check after putting on this unitPress the recording start/stop button Changing the Recording ModeRecording Press the joystick to select the menuPlayback using a smartphone TapThis unit is NFC-compatible Wi-FifunctionInstall the Image App Connect your Android Connect your iOSIf the device is Android non-NFC-compatible or iOS Preparations before using remote operationIf the device is Android NFC-compatible Start up the smartphone application Image AppIf the Wi-Fi connection cannot be established Reset Wi-Fi settingsSelect YES, then press the joystick Troubleshooting It is not a malfunction in following casesLong enough This may cause leaking, overheating, fire or rupture Requests when disposing of this unitBattery used for this unit Keep removed screws etc. out of the reach of small childrenHow to remove the battery Remove the battery by using a screwdriverRegarding the handling of used batteries Specifications Wireless transmitter Optional accessoriesBattery operation time Operating humidityAbout copyright Carefully observe copyright LawsLicenses ENG SQT0251 Accessory Order Form For USA Customers VisaLimited Warranty only for U.S.A Panasonic Products Limited WarrantyAs of April Warranty For Canadian Customers Panasonic Corporation of North America