Panasonic HX-A500 owner manual Cable holder

Ad

Page 22

Assembling the Head Mount

1 Push down the lock lever of the Head Mount (L) to the UNLOCK side.



A Lock lever

2 Attach the Head Mount (R) to the Head Mount (L).

3 Loosen the adjustment knob, and change the direction of the camera holder.

≥To loosen the adjustment knob, rotate it towards 1. To tighten the adjustment knob, rotate it towards 2.

≥Adjust the direction as shown in the illustration, and tighten the adjustment knob again.









BAdjustment knob C Camera holder

Attaching the camera unit to the Head Mount to wear

1 Insert the camera unit until it clicks into place.

	≥ Insert the camera unit so that the microphone	A Microphone
	faces inward.	A Microphone
	faces inward.



2 Fit the camera/main unit connection cable in the cable holder.

≥Loosen the cable to make the shape of the Head Mount.





B Cable holder

C Camera/main unit connection cable

22

SQT0251 (ENG)

Image 22

Contents Wearable Camera Https//eww.pavc.panasonic.co.jp/hdw/oi/A500Dear Customer Following Applies only in the U.S.A FCC NoteImportant Safety Instructions Contains FCC ID VPYLBVX532 Contains IC 772C-LBVX604If you see this symbol About connecting to a PCContents Important About the Waterproof/ Dustproof Handling of this unitIf there is foreign matter adhering to the unit, remove it Check before using underwaterOpen the side cover Close the side cover securelyCaring for this unit after using it underwater Using this unit underwaterRinse with water with the side cover closed Read this first Accessories Cards that you can use with this unitPlayback on DLNA-compatible devices What you can do with this unitLive broadcasting DLNA-compatible devicesPower supply Charging the batteryCharging and recording time Battery capacity indicationCharging/Recording time Cards that you can use with this unit When the Power lamp is flashing during chargingRecording to a card OffCheck that the access lamp has gone off Access lamp Inserting/removing a microSD cardTurning this unit on/off Setting date and timePress the power button to turn on this unit To turn off this unitFormatting Using the menu screenLanguage selection Press the joystickBefore recording Fastening the main unit using the Armband CaseWearing this unit About the Armband Case Pass the band through the band holeCable holder How to remove the camera Things to check after putting on this unitPress the recording start/stop button Changing the Recording ModeRecording Press the joystick to select the menuPlayback using a smartphone TapThis unit is NFC-compatible Wi-FifunctionInstall the Image App Connect your Android Connect your iOSIf the device is Android non-NFC-compatible or iOS Preparations before using remote operationIf the device is Android NFC-compatible Start up the smartphone application Image AppReset Wi-Fi settings If the Wi-Fi connection cannot be establishedSelect YES, then press the joystick It is not a malfunction in following cases TroubleshootingLong enough This may cause leaking, overheating, fire or rupture Requests when disposing of this unitBattery used for this unit Keep removed screws etc. out of the reach of small childrenRemove the battery by using a screwdriver How to remove the batteryRegarding the handling of used batteries Specifications Wireless transmitter Optional accessoriesBattery operation time Operating humidityCarefully observe copyright Laws About copyrightLicenses ENG SQT0251 Accessory Order Form For USA Customers VisaLimited Warranty only for U.S.A Panasonic Products Limited WarrantyAs of April Warranty For Canadian Customers Panasonic Corporation of North America