Panasonic NV-GS120GN Copying on an S-VHS or a VHS Cassette, To Cancel Audio Dubbing, Vcr

Editing Mode

3Press the [;] Button (76) on the Remote

Controller where you want to add new sound.

MULTI/				T
	¥REC	A.DUB
P-IN-P			r	(62)
			sVOL
V/REW	PLAY	FF/W		W
6	1	5
STILL ADV	PAUSE	STILL ADV		(76)
E	;	D
INDEX	STOP	INDEX		P.B. ZOOM
K	∫	L

4Press the [A.DUB] Button (62) on the

Remote Controller.

5To start Audio Dubbing, press the [;] Button (76) on the Remote Controller.

To Cancel Audio Dubbing

Press the [;] Button (76) on the Remote Controller.

The Movie Camera is in the Still Playback Mode again.

To Play Back the Sound Recorded by 12bit Audio Dubbing

Set [TAPE PLAYBACK MENU] >> [PLAYBACK] >> [12bit AUDIO] >> [ST2] or [MIX].

ST1: It plays back only the original sound.

ST2: It plays back only the sound added by Audio Dubbing.

MIX: It plays back both the original sound and the sound added by Audio Dubbing simultaneously.

To Dub Audio While Listening to a

Pre-recorded Sound

When pausing the audio dubbing, set the

[12bit AUDIO] on the [PLAYBACK] Sub-Menu to [ST2] and you can check the pre-recorded sound. When a microphone is used for audio dubbing, use headphones to listen to the pre-recorded sound while dubbing the audio. (When using headphones, set [AV JACK] to [OUT/PHONES].) When the line input is used, you can dub audio while listening to the pre-recorded sound from the speaker.

≥For other notes concerning this item, see -61-.

Copying on an S-VHS (or a VHS) Cassette

(Dubbing)

After connecting the Movie Camera and the VCR as illustrated, start the following procedures.

[S-VIDEO IN]	[VIDEO IN]
2	[AUDIO IN]
	1

AV IN/OUT

PHONES

DV S-VIDEO

IN/OUT

1AV Cable

2S-Video Cable

≥Be sure to press the [OSD] Button (-6-) on the Remote Controller prior to copying so that no indications are visible. Otherwise, the displayed tape counter and function indications are also copied.

Movie Camera:

1Insert the recorded Cassette. VCR:

2Insert an unrecorded Cassette with an erasure prevention tab.

≥If various setups (such as external input, tape speed, etc.) are required, please refer to the

operating instructions of your VCR.

Movie Camera:

3Press the [1] Button to start playback.

VCR:

4Start recording.

5Press the Pause or Stop Button to stop

recording. Movie Camera:

6Press the [∫] Button to stop playback.

-46-