Panasonic NV-GS120GN Adding a Title, Dpof, Lock Setting, Playing Back on Your TV, Audio Dubbing

Others

ªAdding a Title

≥When setting to MPEG4 Playback Mode, Title In Function is not possible. (NV-GS200 only)

≥Original titles are added after the preset titles. ≥The Title In Function and Digital Effects cannot

be used simultaneously.

≥The Title In Function and Continuous Photoshot

cannot be used simultaneously.

≥When a title is displayed in Tape Playback Mode, the title is not output from the DV Terminal.

≥The Multi-Picture Mode cannot be used once the title is inserted.

≥A full-coloured title made on other equipment cannot be played back or added to the picture with this Movie Camera.

≥A title with size of other than 640k480 cannot be displayed.

≥When recording MPEG4 moving pictures is in progress, Title in Function cannot be used. (NV-GS200 only)

≥When the title is displayed on the Multi-screen, the recording and the playback cannot be performed.

≥During external input or DV input, you cannot use Title In Function or display titles on the Multi screen. Select the desired titles to display them on the screen before connecting the cable to the Movie Camera.

ªDPOF

≥Perform the DPOF Settings with your own Movie Camera in use.

≥Verifying the DPOF Settings may take a little time. Wait until the [ACCESS] Lamp goes out.

ªLock Setting

≥The Lock Setting carried out by this Movie Camera is only effective for this Movie Camera.

≥The SD Memory Card has a write protection switch on it. If the switch is moved to the [LOCK] side, you cannot write to or format the Card. If it is moved back, you can.

≥The MPEG4 data recorded by another Movie Camera may not be able to cancel the lock setting. (NV-GS200 only)

ªPlaying Back on Your TV

≥Depending on your TV, nothing may be shown even if you correctly connect the Movie Camera with your TV. In this case, set [AV JACK] on the [AV IN/OUT] or [INITIAL] Sub-Menu to [OUT].

≥If you set [AV JACK] on the [AV IN/OUT] Sub-Menu to [IN/OUT], nothing will be shown on the TV screen except during playback.

≥Picture size may be displayed differently when playing back a Cinema picture on a wide-screen TV with Playback Digital Effect.

≥We recommend you to set [SCREEN] on the [DISPLAY] Sub-Menu to [NORMAL] when playing back MPEG4 on TV. (NV-GS200 only)

ªRecording Pictures from a Card onto a

Tape

≥When recording the Card Image on a Tape, its size is transformed into 720k576 according to the DV format.

≥If you attempt to record a still picture with a

large image size on a Tape, there may be a reduction in the quality of the image.

≥The MPEG4 data cannot be recorded on a Tape. (NV-GS200 only)

ªAudio Dubbing

≥The blank section of a tape cannot be dubbed. ≥Sounds sent through the DV Terminal cannot

be dubbed.

≥If a tape has a non-recorded portion when the tape is dubbed, images and sounds may be disturbed when this portion of the tape is played back.

≥If you set the tape counter back to 0 at the position where you want to stop Audio Dubbing so as to make it possible to use the Memory Stop Function (-68-), Audio Dubbing is terminated automatically when the tape reaches this position.

≥In the case of importing data recorded with Audio Dubbing to a PC using the PC’s software, only the original sound (ST1) may be imported, depending on the software.

ªRecording the Contents of Other

Equipment

≥You cannot record on a tape when MPEG4 recording from external input signals is in progress. (NV-GS200 only)

≥You cannot record on a card when recording on a tape from external input signals is in progress.

Recording to a Card

If you set the Mode Dial to Card Recording Mode, you can use the Photoshot function for external input signals.

≥Black streaks may appear at the 4 edges of the image.

Analog-Digital Conversion

≥When the Movie Camera is connected with other digital video equipment through its DV Terminal, images recorded in analog form from other external equipment can be output to the digital video equipment through the DV Terminal.

-61-