Panasonic NV-GS180GN operating instructions Setting date and time

Page 14

Before using

7Press the joystick to determine the setting.

ªTo exit the menu screen

Press the [MENU] button.

ªTo get back to the previous screen

Move the joystick left.

ªAbout the menu setting

≥The menu screen does not appear during recording. And you cannot record when the menu screen appears.

ªOperating with remote control

The menu screen transition is the same as when the buttons on the main unit are used.

1Press the [MENU] button.

2Select a menu item.

≥Use the direction buttons (3, 2, 1, 4) and [ENTER] button in place of the joystick on the main unit.

3Press the [MENU] button to exit the menu screen.

Setting date and time

If the screen shows the incorrect date/time, then adjust it.

≥Set to Tape Recording Mode or Card

Recording Mode.

1Set [BASIC] >> [CLOCK SET] >> [YES].

2006

2Move the joystick left or right in order to select the item to be set. Then move the joystick up or down to set the desired value.

≥The year will change as follows: 2000, 2001, ..., 2089, 2000, ...

≥The 24-hour clock is used.

3Press the joystick to determine the setting.

≥The clock function starts at [00] seconds.

ªAbout date/time

≥The date and time function are driven by a built-in lithium battery.

≥Make sure to check the time before recording because the built-in clock is not very accurate.

ªRecharging the built-in lithium battery

≥If [0] or [--] is indicated when the camera is turned on, then the built-in lithium battery runs down. Connect the AC adaptor to the camera or place the battery on the camera, and the built-in lithium battery will be recharged. Leave the camera as is for approx. 24 hours, and the battery will drive the date and time for approx.

6 months. (Even if the [OFF/ON] switch is set to [OFF], the battery is still being recharged.)

WARNING

THE LITHIUM BATTERY IN THIS UNIT MUST ONLY BE REPLACED BY QUALIFIED PERSONNEL. IF THIS IS NECESSARY, CONTACT THE PANASONIC CUSTOMER CARE CENTRE ON 132600 FOR YOUR NEAREST AUTHORIZED SERVICE CENTRE.

14

VQT0T93

Image 14

Contents Operating Instructions Information for your safety Contents Optional Before usingAccessories Parts identification and handlingViewfinder -7 Tripod receptacleLens hood Fitting the lens capShoulder strap fixture Adjusting the field of view Using the LCD monitorUsing the viewfinder Grip beltPower supply Slide the OPEN/EJECT lever and open the cassette cover Charging time and recordable timeInserting/removing a cassette Push the Push mark 1 in order to close the cassette holderInserting/removing a card Selecting a mode Turning the camera onCard recording mode AUTO/MANUAL/FOCUS switch is set to Auto How to use the joystickTape recording mode AUTO/MANUAL/FOCUS switch is set to Auto Basic joystick operationsSet Language select the desired language Switching the languageUsing the menu screen For each individual menu, please refer toSetting date and time Order to increase the brightness Entire LCD monitor Adjusting LCD monitor/viewfinderAdjusting the brightness and colour Level Changing the picture quality on LCD monitorUsing the remote control Remote controlSelecting the remote control mode Install a button-type batteryRemote control usable range Concerning the button-type batteryRecord mode Check before recordingConcerning the remaining tape time Indication on the screen On-screen display in the tape recording modeRecording on a tape Remove the lens capRecording still pictures onto a card Photoshot Check the recordingBlank search function Stopping blank search midway ThroughProgressive Photoshot On-screen display in the card recording modeConcerning the focusing area Select the size of still pictures to be Recorded on a cardDigital zoom function Zoom in/out functionRecording yourself To use the zoom microphone functionBacklight compensation function To cancel the quick start when Power is set to OFFQuick start To return to normal recordingTo cancel the soft skin mode Soft skin modeTo cancel the colour night view Function Night view functionsTele-macro function To cancel the tele-macro functionTo cancel fading Fade in/fade out functionRecording images for wide-screen TVs Self-timer recordingWind noise reduction function Image stabilizer function To cancel the image stabilizer function≥Set to Tape Recording Mode Set Advance SIS on Continuous PhotoshotRecording in various situations Scene mode To cancel the scene mode functionRecording in natural colours White balance To restore to automatic adjustment Manual focus adjustmentManual shutter speed/aperture adjustment Iris/gain value range Manual iris/gain adjustmentShutter speed range Slow-motion playback/ frame-by-frame playback Playback modePlaying back tape To return to normal playback Press the Play 1 button on the remote controlVariable-speed search function Frame-by-frame playbackTo display the on-screen information On the TV Playback on TVPlaying back card About the compatibility of still pictures Deleting files recorded on a cardTo display multiple playback files To delete all filesProtecting files on a card To complete the settingsFormatting a card ≥In order to stop formatting, select noSelect Cancel ALL in Step Writing the printing data on a card Dpof settingWhat is DPOF? To set so that all pictures are not PrintedRecording from a tape onto a card Edit modeEdit mode Copying onto a DVD recorder or a VCR DubbingUsing the DV Cable for Recording Digital Dubbing To cancel the standby for recordingBefore recording with audio dubbing ≥Set to Tape Playback ModeAudio dubbing To play back the sound recorded with Audio dubbingWhen you stop printing halfway Tape Recording Menu MenuMenu list Tape Playback MenuCard Recording Menu SetupSetup Display -44-REMOTE Picture Playback MenuMenus related to taking pictures Menus related to playback Other menusOthers IndicationsConfirmatory indications Textual indicationsThere is no paper. Check the connected printer Functions cannot be used simultaneouslyThere is no ink. Check the connected printer Check the connected printerMovie camera power is turned off automatically Before requesting repair Problems and solutionsPower/Body Movie camera power cannot be turned on Movie camera power does not stay on long enoughNo operation other than cassette removal can be performed Remote control does not functionCassette cannot be removed Screen has changed suddenlyPlayback Sound HeadphonesOriginal sound was erased when audio dubbing was performed Different sounds are reproduced at the same timeDuring playback, Unplayable Card is displayed Push the Reset Switch is displayedUsing MotionDV Studio 5.3E LE for DV OthersAbout the movie camera About condensationAbout dirty heads Prepare spare batteries when going out for recording About the batteryBe sure to detach the battery after use While carrying the movie camera, do not drop or bump itAbout the card About the AC adaptorAbout the cassette Folder structure of the cardPeriodical check-ups Explanation of termsLCD monitor/viewfinder Automatic white balanceWhite balance Auto focusSpecifications SpecificationsSpecifications Http//panasonic.co.jp/pavc/global/csPicture F1205Nm0 2500 a