Panasonic NV-GS180GN Recording on a tape, On-screen display in the tape recording mode

Page 19

Record mode

Recording on a tape

Remove the lens cap. (-6-)

(When the camera is turned on with the lens cap fitted, the automatic white balance adjustment may not function properly. Please turn the camera on after removing the lens cap.)

Set to Tape Recording Mode.

1Press the recording start/stop button to start recording.

2Press the recording start/stop button again to pause recording.

;

For the recording time on a tape, refer to -9-. Carry out a recording check (-20-) to verify that

the image is recorded properly.

In order to find the unrecorded section, carry out the blank search (-20-).

ªOn-screen display in the tape recording mode

1)

0h00m10s00f

R0:30

2)

3)¢

100

4)¢

5)¢

¢These indications are displayed only when the card is inserted.

1)Recording time elapse

2)Remaining tape time indication

3)Still picture size

4)Number of recordable still pictures (When no picture can be recorded, this indication will flash in red.)

5)Quality of still pictures

ªConcerning the remaining tape time

indication on the screen

The remaining tape time is indicated in minutes. (When it reaches less than 3 minutes, the indication starts flashing.)

During a 15 seconds or shorter recording, the remaining tape time indication may not be displayed or the remaining tape time may not be displayed correctly.

In some cases, the remaining tape time indication may display remaining tape time that is 2 to 3 minutes shorter than the actual remaining tape time.

Recording still pictures on a card while recording image onto a tape

You can record still pictures while recording image onto a tape.

Set to Tape Recording Mode.

1Press the [PHOTO SHOT] button fully while recording image onto a tape.

PHOTO

SHOT

For the number of still pictures to be recorded on a card, refer to -59-.

When recording pictures onto a card, the recording start/stop button is disabled.

You can select a picture quality for still pictures to be recorded. (-21-)

The sizes of pictures to be recorded are [640].

In order to record still pictures with higher quality, we recommend using the card recording mode.

If the wide mode is used, you cannot record

images onto the card.

The [PHOTO SHOT] button does not work if it is pressed halfway.

19

VQT0T93

Image 19
Contents Operating Instructions Information for your safety Contents Parts identification and handling Before usingAccessories OptionalTripod receptacle Viewfinder -7Shoulder strap fixture Fitting the lens capLens hood Grip belt Using the LCD monitorUsing the viewfinder Adjusting the field of viewPower supply Push the Push mark 1 in order to close the cassette holder Charging time and recordable timeInserting/removing a cassette Slide the OPEN/EJECT lever and open the cassette coverInserting/removing a card Turning the camera on Selecting a modeBasic joystick operations How to use the joystickTape recording mode AUTO/MANUAL/FOCUS switch is set to Auto Card recording mode AUTO/MANUAL/FOCUS switch is set to AutoFor each individual menu, please refer to Switching the languageUsing the menu screen Set Language select the desired languageSetting date and time Changing the picture quality on LCD monitor Adjusting LCD monitor/viewfinderAdjusting the brightness and colour Level Order to increase the brightness Entire LCD monitorRemote control Using the remote controlConcerning the button-type battery Install a button-type batteryRemote control usable range Selecting the remote control modeCheck before recording Record modeRemove the lens cap On-screen display in the tape recording modeRecording on a tape Concerning the remaining tape time Indication on the screenStopping blank search midway Through Check the recordingBlank search function Recording still pictures onto a card PhotoshotSelect the size of still pictures to be Recorded on a card On-screen display in the card recording modeConcerning the focusing area Progressive PhotoshotTo use the zoom microphone function Zoom in/out functionRecording yourself Digital zoom functionTo return to normal recording To cancel the quick start when Power is set to OFFQuick start Backlight compensation functionNight view functions Soft skin modeTo cancel the colour night view Function To cancel the soft skin modeFade in/fade out function To cancel the tele-macro functionTo cancel fading Tele-macro functionWind noise reduction function Self-timer recordingRecording images for wide-screen TVs Continuous Photoshot To cancel the image stabilizer function≥Set to Tape Recording Mode Set Advance SIS on Image stabilizer functionTo cancel the scene mode function Recording in various situations Scene modeRecording in natural colours White balance Manual shutter speed/aperture adjustment Manual focus adjustmentTo restore to automatic adjustment Shutter speed range Manual iris/gain adjustmentIris/gain value range Playing back tape Playback modeSlow-motion playback/ frame-by-frame playback Frame-by-frame playback Press the Play 1 button on the remote controlVariable-speed search function To return to normal playbackPlaying back card Playback on TVTo display the on-screen information On the TV To delete all files Deleting files recorded on a cardTo display multiple playback files About the compatibility of still pictures≥In order to stop formatting, select no To complete the settingsFormatting a card Protecting files on a cardTo set so that all pictures are not Printed Writing the printing data on a card Dpof settingWhat is DPOF? Select Cancel ALL in StepCopying onto a DVD recorder or a VCR Dubbing Edit modeEdit mode Recording from a tape onto a cardTo cancel the standby for recording Using the DV Cable for Recording Digital DubbingTo play back the sound recorded with Audio dubbing ≥Set to Tape Playback ModeAudio dubbing Before recording with audio dubbingWhen you stop printing halfway Tape Playback Menu MenuMenu list Tape Recording MenuPicture Playback Menu SetupSetup Display -44-REMOTE Card Recording MenuMenus related to taking pictures Other menus Menus related to playbackIndications OthersTextual indications Confirmatory indicationsCheck the connected printer Functions cannot be used simultaneouslyThere is no ink. Check the connected printer There is no paper. Check the connected printerMovie camera power does not stay on long enough Before requesting repair Problems and solutionsPower/Body Movie camera power cannot be turned on Movie camera power is turned off automaticallyScreen has changed suddenly Remote control does not functionCassette cannot be removed No operation other than cassette removal can be performedDifferent sounds are reproduced at the same time HeadphonesOriginal sound was erased when audio dubbing was performed Playback SoundOthers Push the Reset Switch is displayedUsing MotionDV Studio 5.3E LE for DV During playback, Unplayable Card is displayedAbout dirty heads About condensationAbout the movie camera While carrying the movie camera, do not drop or bump it About the batteryBe sure to detach the battery after use Prepare spare batteries when going out for recordingFolder structure of the card About the AC adaptorAbout the cassette About the cardAutomatic white balance Explanation of termsLCD monitor/viewfinder Periodical check-upsAuto focus White balanceHttp//panasonic.co.jp/pavc/global/cs SpecificationsSpecifications SpecificationsPicture F1205Nm0 2500 a