Panasonic NV-GS180GN Zoom in/out function, Recording yourself, Digital zoom function

Page 22

Record mode

Zoom in/out function

You can zoom in up to 10k optically.

Set to Tape/Card Recording Mode.

1Wide-angle recording (zoom out): Push the [W/T] lever towards [W]. Close-up recording (zoom in):

Push the [W/T] lever towards [T].

/VOL

W T

1tW T

5tW

T

10tW T

When zooming in and taking a picture while holding the movie camera by hand, we recommend using the image stabilizer function.

When you are zooming on a faraway subject, a sharper focus is achieved if the recording subject is 1.2 metres or further from the movie camera.

When the zoom speed is high, the subject may not be focused easily.

When the zoom magnification is 1k, the movie camera can focus on a subject approx. 4 cm distant from the lens.

ªDigital zoom function

If the zoom magnification exceeds 10 times, then the digital zoom function will be activated. The digital zoom function allows you to select a magnification from 20k to 500k.

1Set [ADVANCE] >> [D.ZOOM] >> [20k] or [500k].

20tW T

[OFF]: Optical zoom only (Up to 10k)

[20k]: Up to 20k

[500k]: Up to 500k

The larger the digital zoom magnification, the more the image quality is degraded.

When the Card Recording mode is used, the digital zoom function cannot be used.

ªTo use the zoom microphone function

Interlocked with the zooming operation, the microphone will collect sounds clearly far away with the tele-shot or those in the vicinity with the wide-angle shot.

Set to Tape Recording Mode.

1 Set [ADVANCE] >> [ZOOM MIC] >> [ON].

ZOOM

ªAbout the variable speed zoom

function

When pushing the [W/T] lever as far as it will go, you can zoom from 1k to 10k in 2.1 seconds at the maximum.

The zoom speed varies according to the amount of movement of the [W/T] lever.

The variable speed zoom function cannot be used with the remote control.

Recording yourself

You can record yourself while viewing the LCD monitor. You can record persons in front of the camera while presenting them the image. The image is horizontally flipped as if you see a mirror image. (The image to be recorded is the same as that recording.)

1Rotate the LCD monitor towards the lens side.

When the LCD monitor is opened, the viewfinder will be automatically turned off. If the LCD monitor is rotated towards the lens side though, then the viewfinder will be activated.

When the LCD monitor is rotated towards the lens side, the icon will not be displayed even if you push the centre of the joystick.

22

VQT0T93

Image 22
Contents Operating Instructions Information for your safety Contents Optional Before usingAccessories Parts identification and handlingViewfinder -7 Tripod receptacleShoulder strap fixture Fitting the lens capLens hood Adjusting the field of view Using the LCD monitorUsing the viewfinder Grip beltPower supply Slide the OPEN/EJECT lever and open the cassette cover Charging time and recordable timeInserting/removing a cassette Push the Push mark 1 in order to close the cassette holderInserting/removing a card Selecting a mode Turning the camera onCard recording mode AUTO/MANUAL/FOCUS switch is set to Auto How to use the joystickTape recording mode AUTO/MANUAL/FOCUS switch is set to Auto Basic joystick operationsSet Language select the desired language Switching the languageUsing the menu screen For each individual menu, please refer toSetting date and time Order to increase the brightness Entire LCD monitor Adjusting LCD monitor/viewfinderAdjusting the brightness and colour Level Changing the picture quality on LCD monitorUsing the remote control Remote controlSelecting the remote control mode Install a button-type batteryRemote control usable range Concerning the button-type batteryRecord mode Check before recordingConcerning the remaining tape time Indication on the screen On-screen display in the tape recording modeRecording on a tape Remove the lens capRecording still pictures onto a card Photoshot Check the recordingBlank search function Stopping blank search midway ThroughProgressive Photoshot On-screen display in the card recording modeConcerning the focusing area Select the size of still pictures to be Recorded on a cardDigital zoom function Zoom in/out functionRecording yourself To use the zoom microphone functionBacklight compensation function To cancel the quick start when Power is set to OFFQuick start To return to normal recordingTo cancel the soft skin mode Soft skin modeTo cancel the colour night view Function Night view functionsTele-macro function To cancel the tele-macro functionTo cancel fading Fade in/fade out functionWind noise reduction function Self-timer recordingRecording images for wide-screen TVs Image stabilizer function To cancel the image stabilizer function≥Set to Tape Recording Mode Set Advance SIS on Continuous PhotoshotRecording in various situations Scene mode To cancel the scene mode functionRecording in natural colours White balance Manual shutter speed/aperture adjustment Manual focus adjustmentTo restore to automatic adjustment Shutter speed range Manual iris/gain adjustmentIris/gain value range Playing back tape Playback modeSlow-motion playback/ frame-by-frame playback To return to normal playback Press the Play 1 button on the remote controlVariable-speed search function Frame-by-frame playbackPlaying back card Playback on TVTo display the on-screen information On the TV About the compatibility of still pictures Deleting files recorded on a cardTo display multiple playback files To delete all filesProtecting files on a card To complete the settingsFormatting a card ≥In order to stop formatting, select noSelect Cancel ALL in Step Writing the printing data on a card Dpof settingWhat is DPOF? To set so that all pictures are not PrintedRecording from a tape onto a card Edit modeEdit mode Copying onto a DVD recorder or a VCR DubbingUsing the DV Cable for Recording Digital Dubbing To cancel the standby for recordingBefore recording with audio dubbing ≥Set to Tape Playback ModeAudio dubbing To play back the sound recorded with Audio dubbingWhen you stop printing halfway Tape Recording Menu MenuMenu list Tape Playback MenuCard Recording Menu SetupSetup Display -44-REMOTE Picture Playback MenuMenus related to taking pictures Menus related to playback Other menusOthers IndicationsConfirmatory indications Textual indicationsThere is no paper. Check the connected printer Functions cannot be used simultaneouslyThere is no ink. Check the connected printer Check the connected printerMovie camera power is turned off automatically Before requesting repair Problems and solutionsPower/Body Movie camera power cannot be turned on Movie camera power does not stay on long enoughNo operation other than cassette removal can be performed Remote control does not functionCassette cannot be removed Screen has changed suddenlyPlayback Sound HeadphonesOriginal sound was erased when audio dubbing was performed Different sounds are reproduced at the same timeDuring playback, Unplayable Card is displayed Push the Reset Switch is displayedUsing MotionDV Studio 5.3E LE for DV OthersAbout dirty heads About condensationAbout the movie camera Prepare spare batteries when going out for recording About the batteryBe sure to detach the battery after use While carrying the movie camera, do not drop or bump itAbout the card About the AC adaptorAbout the cassette Folder structure of the cardPeriodical check-ups Explanation of termsLCD monitor/viewfinder Automatic white balanceWhite balance Auto focusSpecifications SpecificationsSpecifications Http//panasonic.co.jp/pavc/global/csPicture F1205Nm0 2500 a