Panasonic NV-GS180GN Quick start, Backlight compensation function, To return to normal recording

Page 23

Record mode

Quick start

This camera will be put into standby in approx. 1.7 seconds after the power is turned on. ≥Please note in Quick Start Mode approximately

half the pause recording power is being consumed.

Using Quick Start Mode will reduce the battery recording/playback time.

≥This is only activated in the following cases. ≥A tape or a card is inserted, while the Tape

Recording Mode is set.

≥A card is inserted, while the Card Recording Mode is set.

1Press the [QUICK START] button.

QUICK

START

≥The quick start recording lamp lights up. (Press the button again to cancel it.)

2Set the [OFF/ON] switch to [OFF].

OFF ON

≥The quick start is now ready.

3Set the [OFF/ON] switch to [ON].

≥This camera will be put into a recording pause in approx. 1.7 seconds after it is turned on.

ªTo cancel the quick start when the

power is set to [OFF]

Press and hold the [QUICK START] button for approx. 2 seconds. The lamp will go off and the camera will be completely turned off.

≥If the standby continues for approx. 30 minutes, then the lamp will go off and the camera will be completely turned off.

≥When you rotate the mode dial or remove the battery, the quick start recording lamp is turned off and the quick start mode is cancelled. If the movie camera is turned on and the Tape/Card Recording Mode is set though, the lamp turns on and the quick start mode is restored.

≥When the camera is quick-started with the white balance on automatic, it may take some time until the white balance is adjusted if the scene being recorded has a light source different from the scene last recorded. (When the colour night view function is used, however, the white balance of the scene last recorded is retained.)

≥The zoom magnification may differ from when it is in the quick start standby mode and when the recording starts.

Backlight compensation function

This protects a backlit subject from being darkened.

≥Set to Tape/Card Recording Mode.

1Press the joystick until the icon 1 appears.

2Move the joystick right to select the backlight compensation icon [].

ª

 

 

1

 

 

 

 

 

 

≥The image on the screen will become brighter.

ªTo return to normal recording

Select the [] icon again.

≥If you operate the [OFF/ON] switch or the mode dial, the backlight compensation is cancelled.

23

VQT0T93

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Operating Instructions Information for your safety Contents Parts identification and handling Before usingAccessories OptionalTripod receptacle Viewfinder -7Lens hood Fitting the lens capShoulder strap fixture Grip belt Using the LCD monitorUsing the viewfinder Adjusting the field of viewPower supply Push the Push mark 1 in order to close the cassette holder Charging time and recordable timeInserting/removing a cassette Slide the OPEN/EJECT lever and open the cassette coverInserting/removing a card Turning the camera on Selecting a modeBasic joystick operations How to use the joystickTape recording mode AUTO/MANUAL/FOCUS switch is set to Auto Card recording mode AUTO/MANUAL/FOCUS switch is set to AutoFor each individual menu, please refer to Switching the languageUsing the menu screen Set Language select the desired languageSetting date and time Changing the picture quality on LCD monitor Adjusting LCD monitor/viewfinderAdjusting the brightness and colour Level Order to increase the brightness Entire LCD monitorRemote control Using the remote controlConcerning the button-type battery Install a button-type batteryRemote control usable range Selecting the remote control modeCheck before recording Record modeRemove the lens cap On-screen display in the tape recording modeRecording on a tape Concerning the remaining tape time Indication on the screenStopping blank search midway Through Check the recordingBlank search function Recording still pictures onto a card PhotoshotSelect the size of still pictures to be Recorded on a card On-screen display in the card recording modeConcerning the focusing area Progressive PhotoshotTo use the zoom microphone function Zoom in/out functionRecording yourself Digital zoom functionTo return to normal recording To cancel the quick start when Power is set to OFFQuick start Backlight compensation functionNight view functions Soft skin modeTo cancel the colour night view Function To cancel the soft skin modeFade in/fade out function To cancel the tele-macro functionTo cancel fading Tele-macro functionRecording images for wide-screen TVs Self-timer recordingWind noise reduction function Continuous Photoshot To cancel the image stabilizer function≥Set to Tape Recording Mode Set Advance SIS on Image stabilizer functionTo cancel the scene mode function Recording in various situations Scene modeRecording in natural colours White balance To restore to automatic adjustment Manual focus adjustmentManual shutter speed/aperture adjustment Iris/gain value range Manual iris/gain adjustmentShutter speed range Slow-motion playback/ frame-by-frame playback Playback modePlaying back tape Frame-by-frame playback Press the Play 1 button on the remote controlVariable-speed search function To return to normal playbackTo display the on-screen information On the TV Playback on TVPlaying back card To delete all files Deleting files recorded on a cardTo display multiple playback files About the compatibility of still pictures≥In order to stop formatting, select no To complete the settingsFormatting a card Protecting files on a cardTo set so that all pictures are not Printed Writing the printing data on a card Dpof settingWhat is DPOF? Select Cancel ALL in StepCopying onto a DVD recorder or a VCR Dubbing Edit modeEdit mode Recording from a tape onto a cardTo cancel the standby for recording Using the DV Cable for Recording Digital DubbingTo play back the sound recorded with Audio dubbing ≥Set to Tape Playback ModeAudio dubbing Before recording with audio dubbingWhen you stop printing halfway Tape Playback Menu MenuMenu list Tape Recording MenuPicture Playback Menu SetupSetup Display -44-REMOTE Card Recording MenuMenus related to taking pictures Other menus Menus related to playbackIndications OthersTextual indications Confirmatory indicationsCheck the connected printer Functions cannot be used simultaneouslyThere is no ink. Check the connected printer There is no paper. Check the connected printerMovie camera power does not stay on long enough Before requesting repair Problems and solutionsPower/Body Movie camera power cannot be turned on Movie camera power is turned off automaticallyScreen has changed suddenly Remote control does not functionCassette cannot be removed No operation other than cassette removal can be performedDifferent sounds are reproduced at the same time HeadphonesOriginal sound was erased when audio dubbing was performed Playback SoundOthers Push the Reset Switch is displayedUsing MotionDV Studio 5.3E LE for DV During playback, Unplayable Card is displayedAbout the movie camera About condensationAbout dirty heads While carrying the movie camera, do not drop or bump it About the batteryBe sure to detach the battery after use Prepare spare batteries when going out for recordingFolder structure of the card About the AC adaptorAbout the cassette About the cardAutomatic white balance Explanation of termsLCD monitor/viewfinder Periodical check-upsAuto focus White balanceHttp//panasonic.co.jp/pavc/global/cs SpecificationsSpecifications SpecificationsPicture F1205Nm0 2500 a
Top Page Image Contents