Panasonic NV-GS180GN operating instructions Edit mode, Recording from a tape onto a card

Edit mode

Edit mode

Recording from a tape onto a card

Still pictures can be recorded on a memory card from scenes that have already been recorded on a cassette.

≥Set to Tape Playback Mode.

≥Insert a tape which already has recorded contents and a card.

1Start playback.

2Pause at the scene you wish to record, and press the [PHOTO SHOT] button.

PHOTO

SHOT

≥Audio will not be recorded.

≥The size of still pictures recorded on a card becomes [640]. (This is not mega pixel still picture recording.)

≥If you press the [PHOTO SHOT] button without pausing, blurred pictures may be recorded.

≥For pictures with an aspect ratio of 16:9, “CANNOT RECORD (WIDE MODE)” is shown, indicating that still pictures cannot be recorded.

≥DV input and wide images recorded on a tape cannot be recorded on a card.

Copying onto a DVD recorder or a VCR (Dubbing)

Pictures recorded by the movie camera can be stored on a DVD-RAM or other such media. Refer to the instructions for the recorder.

≥Place a recorded cassette in the movie camera, and an unrecorded DVD-RAM or cassette in the DVD recorder or VCR.

1Connect the movie camera and the recorder.

Connecting with the AV cable

AV/	[VIDEO IN]
	[S-VIDEO IN]
	[AUDIO IN]

1 2

S-VIDEO

≥Connect the movie camera and the recorder by using the AV cable 1.

≥If the recorder has an S-Video terminal, then also connect an S-Video cable 2 (optional). It allows you to copy clearer image.

Connecting with the optional DV cable (Only for equipment with a DV terminal)

DV

2Turn on the movie camera and set to Tape Playback Mode.

3Select the input channel on the TV set and recorder.

4Move the joystick up to select the [1/;] icon to start playback.

≥The image and sound are reproduced.

5Start recording.

6Stop recording.

7Move the joystick down to select the [∫] icon to stop playback.

38

VQT0T93