Panasonic PV-GS180 operating instructions Setting date and time

Before using

7Press the joystick to determine the setting.

ªTo exit the menu screen

Press the [MENU] button.

ªTo get back to the previous screen

Move the joystick left.

ªAbout the menu setting

≥The menu screen does not appear during recording. And you cannot record when the menu screen appears.

ªOperating with remote control

(optional)

The menu screen transition is the same as when the buttons on the main unit are used.

1Press the [MENU] button.

2Select a menu item.

≥Use the direction buttons (3, 2, 1, 4) and [ENTER] button in place of the joystick on the main unit.

3Press the [MENU] button, to exit the menu screen.

Setting date and time

If the screen shows the incorrect date/time, then adjust it.

≥Set to Tape Recording Mode or Card

Recording Mode.

1Set [BASIC] >> [CLOCK SET] >> [YES].

2006

2Move the joystick left or right in order to select the item to be set. Then move the joystick up or down to set the desired value.

≥The year will change as follows: 2000, 2001, ..., 2089, 2000, ...

≥The 12-hour clock is used.

3Press the joystick to determine the setting.

≥The clock function starts at [00] seconds.

ªAbout date/time

≥The date and time function are driven by a built-in lithium battery.

≥Make sure to check the time before recording because the built-in clock is not very accurate.

ªRecharging the built-in lithium battery

≥If [0] or [--] is indicated when the Camcorder is turned on, then the built-in lithium battery has run down. Connect the AC adaptor to the Camcorder or place the battery on the Camcorder, and the built-in lithium battery will be recharged. Leave the Camcorder as is for approx. 24 hours, and the battery will drive the date and time for approx. 6 months. (Even if the [OFF/ON] switch is set to [OFF], the battery is still being recharged.)

22

LSQT0973