Edit mode
≥For more information, refer to the operating instructions for your TV set and recorder.
≥When you do not need functional indications or date and time indications, press the
[EXT DISPLAY] button on the remote control for no indication. (When you connect the Camcorder and a recorder with the DV cable, these indications may not appear.)
ªWhen neither image nor sound from
the Camcorder is output to the TV set
≥Check that the plugs are inserted as far as they go.
≥Check the connected terminal.
≥When no image is presented on the TV even if set [BASIC] >> [AV JACK] >> [OUT/Ë], set to [OUT].
Using the DV cable for Recording (Digital Dubbing)
By connecting other digital video equipment with DV terminal and the Camcorder by using the DV cable
≥Set to Tape Playback Mode. (Player/ recorder)
1Connect the Camcorder and digital video equipment with the DV cable.
DV
1
DV
2Set [ADVANCE] >> [REC STDBY] >> [YES]. (Recorder)
≥You do not have to follow this step when the remote control is used in the digital dubbing.
3Start playback. (Player)
4Start recording. (Recorder)
Move the joystick up to select [¥/;] icon.
Or, while pressing the [¥REC] button on the remote control, press the [PLAY 1] button.
5Move the joystick up to select the [¥/;] icon again or press the [;] button on the remote control to stop recording. (Recorder)
6Stop playback. (Player)
ªTo cancel the standby for recording
When the Camcorder is in standby for recording, move the joystick down and select the [∫] icon.
≥Do not plug or unplug the DV cable during dubbing, or the dubbing may not be completed properly.
≥If a picture (bilingual video, etc.) containing main sound and sub sound has been dubbed, select the desired sound using [SETUP] >>
[AUDIO OUT] on playback.
≥Even if you use a device equipped with DV terminals such as IEEE1394, you may not be able to perform digital dubbing in some cases. For more information, see the instructions for equipment connected.
≥Regardless of the menu settings on the recorder, digital dubbing is carried out in the same mode as the [AUDIO REC] mode of the playback tape.
≥The images on the recorder monitor may be disturbed, but it does not affect the recorded images.
≥If a picture containing a copyright protection signal (copy guard) is recorded by the Camcorder, the picture is distorted by
≥Disconnect the USB cable since input signals from the external input terminal cannot be recorded while it is connected with the USB cable.
≥When wide images are input, the display such as the menu screen or the operation icon is expanded horizontally.
≥While pictures are input from the DV terminal, the operation icon blinks on instead of appearing from the side of the screen when you press the center of the joystick.
46