Playback mode
Playback mode
Playing back tape
≥Set to Tape Playback Mode.
PC
1Operate with joystick.
1/;: Playback/Pause
6: Rewind/Review playback (Reverts to playback with the 1/; icon.)
5: Fast forward/Cue playback (Reverts to playback with the 1/; icon.)
∫: Stop
≥During cue/review playback,
≥Before and after cue/review playback, the screen may become blue for a moment or images may be distorted.
ªTo adjust volume
Adjust the speaker or headphone volume for playback.
1Move the [s /VOLr] lever to adjust the volume.
/VOL
W T
Towards [r]: increases the volume
Towards [s]: decreases the volume (The closer to [r], the higher the volume.)
≥On the remote control, press the [T] button to increase the volume or the [W] button to decrease it.
≥When the adjustment is completed, the volume indication will disappear.
≥If you do not hear the sound, check the settings of [SETUP] >> [12bit AUDIO].
40
ªRepeat playback
When the tape end is reached, the tape will be rewound and played back again.
1Set [ADVANCE] >> [REPEAT PLAY] >> [ON].
≥The [ ] indication appears. (In order to cancel the repeat playback mode, set [REPEAT PLAY] >> [OFF] or set [OFF/ON] switch to [OFF].)
≥When you set [USB FUNCTION] >> [WEB CAM] and then connect the USB connection cable, the repeat playback mode is canceled.
ªSettings on the audio
≥If you cannot listen to the desired audio when
playing back a tape, check the settings in [SETUP] >> [12bit AUDIO].
≥When you record or dub the audio in [12bit] and set [SETUP] >> [12bit AUDIO] >> [MIX], the audio will be played back in stereo sound regardless of the settings in [AUDIO OUT].
Slow-motion playback/ frame-by-frame playback
≥Set to Tape Playback Mode.
Slow-motion playback
If the image is recorded in the SP mode, then it will be played back at a speed approx. 1/5 the normal speed.
If the image is recorded in the LP mode, then it will be played back at a speed approx. 1/3 the normal speed.
1Press the [E] button or the [D] button on the remote control.
≥If the