Panasonic PV-GS180 operating instructions Recording in natural colors White balance

Page 37

Record mode

Recording in natural colors (White balance)

The automatic white balance function may not reproduce natural colors depending on the scene or lighting conditions. If so, you can adjust the white balance manually.

Set to Tape/Card Recording Mode.

1Set the [AUTO/MANUAL/FOCUS] switch to [MANUAL].

AUTO

MANUAL

FOCUS

2Move the joystick down until the white balance indication appears. ([ AWB ] etc.)

MNL

AWB

3Move the joystick left or right in order to select the white balance mode.

1)

1 AWB

2)

1

3)

1

4)

1

1)Auto white balance adjustment [ AWB ]

2)Indoor mode (for recording under incandescent lamps) [ ]

3)Outdoor mode [ ]

4)Manual adjustment mode [ ]

ªTo restore to the automatic

adjustment

Move the joystick left or right until the [ AWB ] indication appears. Or, set the [AUTO/MANUAL/ FOCUS] switch to [AUTO].

When the Camcorder is turned on with the lens cap fitted, the automatic white balance adjustment may not function properly. Please turn the Camcorder on after removing the lens cap.

When setting both the white balance and the iris/gain, set the white balance first.

Whenever recording conditions change, re-set the white balance for correct adjustment.

ªTo set the white balance manually

Select [ ] in Step 3. Then, while viewing a white subject on the entire screen, move the joystick up to select the [ ] indication.

ªAbout flashing of the [ ] indication

When the manual adjustment mode is selected

Flashing indicates that the white balance previously adjusted is stored. This setting is stored until the white balance is adjusted again.

When white balance cannot be set in the manual adjustment mode

White balance may not be adjusted properly in the manual adjustment mode in dark places. If so, use the auto white balance mode.

During setting in the manual adjustment mode

When the setting is completed, it will remain lit.

ªAbout the white balance sensor

The white balance sensor detects the type of light source during recording.

Do not cover the white balance sensor during recording, or it may not function properly.

ªAbout the black balance adjustment

This is one of the 3CCD system functions that automatically adjusts the black when the white balance is set in the manual adjustment mode. When the black balance is adjusted, the screen will temporarily be black.

1 2 3

1Black balance adjustment (Flashes.)

2 White balance adjustment (Flashes.)

3 Adjustment completed (Lights up.)

37

LSQT0973

Image 37
Contents Operating Instructions AC Adaptor Things You Should KnowLSQT0973 Important Safety Instructions Precautions End User License Agreement for Video Stream Driver Article 8 Termination of License Article 5 Reverse Engineering, Decompiling or DisassemblyContents Edit mode Playback modeWith a PC MenuQuick Guide Recording on a tape How to turn off the powerRecording still pictures onto a card Photoshot Playing back tapeParts identification and handling AccessoriesCamcorder Tripod receptacle Viewfinder -15Attaching the lens cap Adjust the belt length and the pad positionGrip belt Shoulder strap fixtureUsing the viewfinder Using the LCD monitorAdjusting the field of view Extending the viewfinderConnecting to the AC outlet Power supplyRemoving the battery ≥Hold the battery with your hand so it does not fallCharging time and recordable time When the cassette holder does not Come outInserting/removing a cassette Inserting/removing a card When the cassette holder cannot be HousedInserting/removing the cassette Accidental erasure preventionCard access lamp Selecting a modeTurning the Camcorder on SD Memory CardTape recording mode AUTO/MANUAL/FOCUS switch is set to Auto How to use the joystickCard recording mode AUTO/MANUAL/FOCUS switch is set to Auto Basic joystick operationsUsing the menu screen Switching the languageSet Language English For each individual menu, please refer toSetting date and time Using the remote control optional Adjusting LCD monitor/viewfinderAdjusting the brightness and color Level Remote controlRemote control usable range Install a button-type batteryConcerning the button-type battery Selecting the remote control modeRecording mode About auto modeCheck before recording Basic Camcorder positioningPower Save On-screen display in the tape recording modeOFF When 5 minutes passes without Recording on a tapeCheck the recording ≥Set to Tape Recording ModeBlank search function Stopping a blank search midway ThroughRecording still pictures onto a card Photoshot On-screen display in the card recording modeTo record still pictures clearly Progressive PhotoshotZoom in/out function Recording yourself To cancel the quick start when OFF/ON switch is set to OFFQuick start To use the zoom microphone functionBacklight compensation function To cancel the MagicPix functionMagicPix functions To return to normal recordingTele-macro function Soft skin modeFade in/fade out function Wind noise reduction function Self-timer recordingRecording images for wide-screen TVs ≥Set to Tape Recording Mode Set Advance EIS on To cancel the image stabilizer functionImage stabilizer function RapidFire Consecutive PhotoshotTo cancel the scene mode function Recording in various situations Scene modeRecording in natural colors White balance Manual shutter speed/aperture adjustment Manual focus adjustmentTo restore to automatic adjustment Shutter speed range Manual iris/gain adjustmentIris/gain value range Settings on the audio To adjust volumePlaying back tape Slow-motion playback/ frame-by-frame playbackVariable-speed search function Press the Play 1 button on the remote controlTo return to normal playback Frame-by-frame playbackPlaying back card Playback on TVTo display the on-screen information On the TV Move the joystick down to select the icon to stop playbackTo display multiple playback files Deleting files recorded on a cardAbout the compatibility of still pictures To delete all filesFormatting a card Writing the printing data on a card Dpof settingProtecting files on a card Recording from a tape onto a card Edit modeCopying onto a DVD recorder or a VCR Dubbing ≥The image and sound are reproducedTo cancel the standby for recording Using the DV cable for Recording Digital DubbingAudio dubbing ≥Set to Tape Playback ModeBefore recording with audio dubbing To play back the sound recorded with Audio dubbingWhen you stop printing halfway Driver Installation Using the Camcorder with a PCCheck before Use Using Built-in SD Drive Connecting Computer CamcorderSet the Camcorder to PC Mode InterfaceInstalling Video Stream Driver Using as a Web cameraOperating environment ≥Click start Programs Windows Messenger or MSN Messenger Usual operation WEB Camera mode Tape Playback ModeSetting up MSN Messenger Setting up Windows MessengerClick Sign Type in your Sign-in name and password ≥Windows Messenger is activatedDV Data Streaming Function Connecting Computer and CamcorderConfirmation before connection ≥System Properties is displayedTo disconnect USB cable safely Click Update DriverIf a description other than Microsoft is displayed Double click≥When Mode Dial is turned to change modes If you no longer need driver UninstallScreens may vary with the type of OS About the compatibility of the card Files About the SD Memory CardSD Memory Card Files recorded on a SD Memory CardTape Recording Menu Menu listTape Playback Menu MenuPicture Playback Menu Card Recording MenuBasic DATE/TIME -60-PROTECT Menus related to playback Menus related to taking picturesOther menus Demo ModeInitial SET Basic indications IndicationsRecording indications Playback indicationsTextual indications Confirmatory indicationsThere is no ink. Check the connected printer Functions cannot be used simultaneouslyThere is no paper. Check the connected printer Check the connected printerPower/Body Camcorder power cannot be turned on Before requesting repair Problems and solutionsCamcorder power is turned off Automatically Camcorder power does not stay on long enoughCassette cannot be removed Remote control does not functionNo operation other than cassette removal can be performed RecordingAudio dubbing cannot be performed Original sound was erased when audio dubbing was performedSounds cannot be played back Noise is heard from the right headphoneAbout condensation About the Camcorder About dirty headsMay be adversely affected While carrying the Camcorder, do not drop or bump itAbout the AC adaptor About the batteryAbout the cassette Folder structure of the card About the cardLCD monitor/Viewfinder Periodical check-upsAutomatic white balance Explanation of termsWhite balance Auto focusHttp//panasonic.co.jp/pavc/global/cs SpecificationsPicture Accessory# Description Camcorder Accessory SystemAM-5 PM M-F, 6 AM-1030 AM SAT, Pacific Time Camcorder Accessory Order Form For USA CustomersRequest for Service Notice USA Only Request for Service NoticePanasonic Video Products Limited Warranty For USA CustomersAccessory Purchases Customer Services DirectoryCentralized Factory Servicenter Npcparts@us.panasonic.comAmbler Drive, Mississauga, Ontario L4W 2T3 Warranty For Canadian CustomersCamcorder Product One 1 year, parts and labour For Product Operation ASSISTANCE, please contactNumerics IndexSpanish Quick Use Guide Guía española para el uso rápido Grabación en una cinta Cómo apagar la alimentaciónGrabación de imágenes fijas en una Tarjeta Photoshot Reproducción de la cintaF1005Nm2026 3000 D