Panasonic NV GS 330 Information for your safety, Button-type battery 60 oC Battery pack 60 oC

Page 2

Information for your safety

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE,

DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

USE ONLY THE RECOMMENDED ACCESSORIES.

DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION!

DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.

DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.

DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED CANDLES, ON THE UNIT.

DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY MANNER.

The socket outlet shall be installed near the equipment and easily accessible.

The mains plug of the power supply cord shall remain readily operable.

To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from AC receptacle.

Product Identification Marking is located on the bottom of units.

Warning

Risk of fire, explosion and burns. Do not disassemble.

Do not heat the batteries above the following temperatures or incinerate.

Button-type battery 60 oC

Battery pack 60 oC

2

ªCarefully read the Operating Instructions and use the Movie

Camera correctly.

Injury or material damage resulting from any kind of use that is not in accordance with the operating procedures explained in these Operating Instructions are the sole responsibility of the user.

Try out the Movie Camera.

Be sure to try out the Movie Camera before recording your first important event and check that it records properly and functions correctly.

The manufacturer is not liable for loss of recorded contents.

The manufacturer shall in no event be liable for the loss of recordings due to malfunction or defect of this Movie Camera, its accessories or cassettes.

Carefully observe copyright laws.

Recording of pre-recorded tapes or discs or other published or broadcast material for purposes other than your own private use may infringe copyright laws. Even for the purpose of private use, recording of certain material may be restricted.

U.S. Patent Nos. 6,836,549; 6,381,747; 7,050,698; 6,516,132; and 5,583,936.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

SDHC Logo is a trademark. miniSD Logo is a trademark.

Leica is a registered trademark of Leica Microsystems IR GmbH and Dicomar is a registered trademark of Leica Camera AG.

All other company and product names in the operating instructions are trademarks or registered trademarks of their respective corporations.

Files recorded on SD Memory Card

It may not be possible to play back the files on this Movie Camera recorded on and created by other equipment or vice versa. For this reason, check the compatibility of the equipment in advance.

VQT1L48

Image 2
Contents Operating Instructions Manufacturer is not liable for loss of recorded contents Information for your safetyButton-type battery 60 oC Battery pack 60 oC Carefully observe copyright lawsMenu operation flow is indicated by in the description If you see this symbolPages for reference Before opening the CD-ROM package, please read the following Contents Optional Before usingAccessories Parts identification and handlingViewfinder -13 Tripod receptacle ≥When you remove the lens cap, press the knobs firmlyFitting the lens cap Lens hoodAdjust the belt length and the pad position Power supplyCharging the battery Grip beltRemoving the battery Connecting to the AC outletFitting the battery Charging time and recordable time How to turn on the powerHow to turn off the power Turning the camera onSetting date and time About date/timeRecharging the built-in lithium battery Using the LCD monitorUsing the viewfinder Adjusting the field of viewQuick Start To cancel Quick Start≥Set to Tape/Card Recording Mode Open the LCD monitor or extend the ViewfinderInserting/removing a cassette When the cassette holder does not Come outWhen the cassette holder cannot be housed Accidental erasure preventionInserting/removing a card Card access lampConcerning the write protection Switch on the SD Card Concerning the cardBasic joystick operations Selecting a modeHow to use the joystick Joystick and screen displayCard Playback Mode Tape playback modeCard recording mode AUTO/MANUAL/FOCUS switch is set to Auto Slide show start/pause DeleteUsing the menu screen Help modeSwitching the language To exit the Help modeTo exit the menu screen About the menu settingOperating with remote control To get back to the previous screenSet Setup Power LCD on Adjusting LCD monitor/viewfinderAdjusting the brightness and colour Level Order to increase the brightness Entire LCD monitorInstall a button-type battery Using the remote controlRemote control Concerning the button-type battery Remote control usable rangeSelecting the remote control mode Record mode Check before recordingConcerning the remaining tape time Indication on the screen On-screen display in the tape recording modeRecording on a tape Stopping blank search midway Through Recording checkBlank search function Set Advanced Picture Size select the desired picture size ≥Set to Card Recording ModeRecording still pictures onto a card Photoshot Press the button fullySelect the size of still pictures to be Recorded on a card On-screen display in the card recording modeTo record still pictures clearly Select the picture quality for Photoshot imagesDigital zoom function Concerning the focusing areaZoom in/out function About the variable speed zoom FunctionTo return to normal recording Recording yourselfBacklight compensation function ≥Extend the viewfinder to see the picture while recordingTo cancel the soft skin mode Soft skin modeTo cancel the colour night view function Colour night view functionFade in/fade out function To cancel the tele macro functionTele macro function Wind noise reduction function Anti-Ground-Shooting AGSTo Cancel the Wide/43 Function Self-timer recordingTo stop the timer midway through Wide/43 FunctionGuideline function Recording in various situations Scene modeImage stabilizer function To restore to the automatic Adjustment Recording in natural colours White balanceTo set the white balance manually Manual focus adjustmentAbout the black balance adjustment About flashing of the indicationShutter speed range Manual shutter speed/aperture adjustmentTo restore to automatic adjustment Iris/gain value rangeSettings on the audio Playback modeTo adjust volume Playing back tapeTo return to normal playback Slow-motion playback/ frame-by-frame playbackVariable-speed search function Playback on TV To display the on-screen information On the TVTo display multiple playback files Move the s /VOLr lever to switch the imagesPlaying back card About the compatibility of still picturesTo delete all files Deleting files recorded on a cardFormatting a card Move the joystick down to selectWhat is DPOF? Writing the printing data on a card Dpof settingTo complete the settings Protecting files on a cardRecording from a tape onto a card Edit modeEdit mode Copying onto a DVD recorder or a VCR DubbingUsing the DV Cable for Recording Digital Dubbing You can add music or narration to the recorded cassette To cancel the standby for recordingAudio dubbing ≥Set Basic REC Speed SP to take pictures Before recording with audio dubbingTo play back the sound recorded with Audio dubbing USB cableWhen you stop printing halfway Introduction With a PCBefore Use Names and functions of packaged ItemsSweetMovieLife 1.1E MotionDV Studio 6.0E LE for DV Check before UseOperating environment USB Driver Card reader function Install/ConnectionInstalling USB Driver Click USB DriverClick SweetMovieLife 1.1E Installing SweetMovieLife 1.1EInstalling MotionDV Studio 6.0E LE InstructionsFor Windows XP/2000 Connecting the movie camera to personal computerConfirmation before connection For Windows VistaIf a description other than Microsoft is displayed ≥Update the driver with the following procedureClick Update Driver With USB cable supplied ≥You cannot use SweetMovieLife in tape recording modeSoftware Set Basic or Advanced USB Function Motion DVDV cable DV terminal Install USB DriverWith DV cable optional ≥Refer to page -53-for the minimum requirementsStart the MSN Messenger/Windows Live Messenger When you use the movie camera as a Web CameraOthers Copying files recorded on a card to a personal computerViewing files copied from a card If you no longer need software or driver UninstallTo disconnect USB cable safely Double click the icon in task trayCopying still pictures on PC Using on MacintoshOperating environment on iMovie 4/ iMovie HD/iMovie ’08 To disconnect USB cable safelyVQT1L48 Tape Recording Menu MenuMenu list Tape Playback MenuBasic DATE/TIME -65-PROTECT Card Recording MenuCard Playback Menu Other menus Menus related to taking picturesMenus related to playback Others IndicationsConfirmatory indications Textual indicationsThere is no paper. Check the connected printer Functions cannot be used simultaneouslyThere is no ink. Check the connected printer Check the connected printerBefore requesting repair Problems and solutions Cassette cannot be inserted Original sound was erased when audio dubbing was performedScreen has changed suddenly Auto focus function does not workEven if a card is formatted, it cannot be used Push the Reset Switch is displayedPlayback picture is not clear During playback, Unplayable Card is displayedAbout condensation About the movie camera Clean the heads with the digital video head cleanerAbout dirty heads ≥If the movie camera is sprayed with suchPrepare spare batteries when going out for recording About the batteryBe sure to detach the battery after use Do not throw old battery into fireAbout the card About the AC adaptorAbout the cassette Folder structure of the cardAutomatic white balance Explanation of termsPeriodical check-ups LCD monitorWhite balance Auto focusSpecifications SpecificationsSpecifications Http//panasonic.co.jp/pavc/global/csMode F1207RA0 500 a