Record mode
Recording check
The last image recorded is played back for 2 to
3 seconds. After checking, the camera will be set to a recording pause.
≥Set to Tape Recording Mode.
1Press the joystick to display the icon during the recording pause. Move the joystick down until icon 1 appears.
2Move the joystick left to select the recording check icon [ 
].
1 
≥The [RECORDING CHECK STARTED] indication appears on the screen of the movie camera.
Blank search function
Searches for the last part of the image recorded (unused part of the tape). After the search is finished, the blank search function is cancelled and the camera is put into recording pause. ≥Set to Tape Recording Mode.
1Press the joystick to display the icon during the recording pause. Move the joystick down until icon 1 appears.
2Move the joystick right to select the blank search icon [
].
1
3When the confirmation message appears, select [YES] and press the centre of the joystick.
ªStopping blank search midway
through
Move the joystick down to select the [∫] icon.
≥If the cassette tape has no blank part, then the
camera will stop at the end of the tape.
≥The camera stops at a point approx. 1 second before the end of the last image recorded. When you start recording at that point, the image can be recorded seamlessly from the last image.
26
VQT1L48