
Record mode
Tele macro function
By focusing only on the subject and blurring the background, the image can be impressive. This camera can focus on the subject at a distance of approx. 50 cm.
≥Set to Tape/Card Recording Mode.
1Press the joystick to display the icon. Move the joystick down until icon 1 appears.
2Move the joystick right to select the tele macro icon [
].
1
≥The [TELE MACRO ON] indication appears on the screen of the movie camera.
≥If the magnification is 10k or less, then it is automatically set to 10k.
ªTo cancel the tele macro function
Select the [] icon again.
≥The [TELE MACRO OFF] indication appears on the screen of the movie camera.
≥If a sharper focus cannot be achieved, adjust the focus manually.
≥In the following cases, the tele macro function is cancelled.
≥The zoom magnification becomes lower than 10k.
≥The power is off or the mode dial is operated.
Fade in/fade out function
Fade in
The image and audio gradually appear.
Fade out
The image and audio gradually disappear. ≥Set to Tape Recording Mode.
1Press the joystick to display the icon. Move the joystick down until icon 1 appears.
2Move the joystick left to select the fade icon [].
1
B
≥The [FADE ON] indication appears on the screen of the movie camera.
3Press the recording start/stop button. Start recording. (fade in)
When you start recording, the image/audio disappeared completely and the image/audio gradually appears.
Pause recording. (fade out)
The image/audio gradually disappears. After the image/audio completely disappears, recording stops.
32
VQT1L48