Panasonic PVGS90P Setting date and time, About date/time, Recharging the built-in lithium battery

Page 15

Before using

ªHow to turn the power on and off with the LCD monitor/viewfinder

When the mode dial is set to Tape Recording Mode, the power can be turned on and off with the LCD monitor and the viewfinder.

1Open the LCD monitor out or extend the viewfinder to turn on the power. (-16-)

≥The LCD monitor or viewfinder will be activated.

2Close the LCD monitor and retract the viewfinder to turn off the power.

≥The power will not turn off unless the LCD monitor is closed and the viewfinder is retracted.

≥The Status indicator automatically goes off and the power turns off. (If quick start is set to [ON] (-17-), the unit goes into quick start standby mode and the Status indicator lights green.)

≥The power does not turn off even if the

LCD monitor is closed and the viewfinder is retracted while recording on a tape.

3Open the LCD monitor or extend the viewfinder to turn the power on and use the Camcorder again.

≥The Status indicator lights red and the power turns on.

Set the mode dial to OFF when this unit is not being used.

Setting date and time

When the Camcorder is turned on for the first time, [SET DATE AND TIME] will appear.

≥Select [YES] and press the center of the joystick. Perform steps 2 and 3 below to set the date/time.

≥Set to Tape Recording Mode.

1Set [BASIC] >> [CLOCK SET] >> [YES]. (-20-)

2Move the joystick left or right in order to select the item to be set. Then move the joystick up or down to set the desired value.

≥The year will change as follows: 2000, 2001, ..., 2089, 2000, ...

≥The 12-hour clock is used.

3Press the joystick to determine the setting.

≥The clock function starts at [00] seconds.

ªAbout date/time

≥The date and time function are driven by a built- in lithium battery.

≥Make sure to check the time before recording because the built-in clock is not very accurate.

ªRecharging the built-in lithium battery

≥If [0] or [--] appears when the Camcorder is turned on, then the built-in lithium battery needs to be charged. Use the steps below to charge the battery.

Connect the AC adaptor to the Camcorder or attach the battery to the Camcorder, and the built-in lithium battery will be recharged. Leave the Camcorder as is for approx. 24 hours, and

the battery will drive the date and time for approx. 6 months. (The battery is still being recharged even if the mode dial is set to OFF.)

≥When turning on the power for the first time after charging, [SET DATE AND TIME] will appear. Select [YES] and set the date and time.

15

LSQT1284

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Model No. PV-GS90P/PC Do not Expose this Equipment to Rain or Moisture Following mark and symbols are located on bottom of the unitFollowing Applies only in Canada Following Applies only in the U.S.ADeclaration of Conformity Trade Name Panasonic Model No PV-GS90PImportant Safety Instructions Battery pack Lithium ion battery pack USE & LocationCare AC adaptor Contents Quick Guide AccessoriesCharging the battery Inserting the batteryHow to turn on the power Recording on a tapePlaying back tape Parts identification and handling CamcorderViewfinder -16 LCD monitor -16 How to remove the Sensor tag for U.S.A. onlyCharging lamp Charge Using the lens coverPower supply Grip beltConnecting to the AC outlet Removing the batteryCharging time and recordable time Tape Playback Mode Selecting a mode Turning the Camcorder on/off≥Rotate the mode dial slowly Tape Recording ModeSetting date and time Recharging the built-in lithium batteryAbout date/time Adjust the focus by sliding the eyepiece corrector knob Using the LCD monitorUsing the viewfinder Adjusting the viewfinder field of viewOpen the LCD monitor or extend the Viewfinder To cancel Quick StartSet Setup Quick Start OFF Quick StartAccidental erasure prevention When the cassette holder does not come outWhen the cassette holder cannot be housed Inserting/removing a cassetteJoystick and screen display How to use the joystickTape playback mode Basic joystick operationsLanguage selection Help modeUsing the menu screen To exit the Help modeTo exit the menu screen Adjusting LCD monitor/viewfinderAbout the menu setting Adjusting the brightness and color levelTo cancel the built-in LED video light Recording with the built-in LED video lightPress the Light button Basic Camcorder positioning About auto modeRecording mode Check before recordingAbout the remaining tape time indication on the screen On-screen display in the tape recording modePower Save Recording on a tapeRecording check Blank search functionStopping blank search midway through Continuous photoshot ≥Set to Tape Recording ModeRecording a still picture on a tape Photoshot Zoom in/out functionBacklight compensation function Recording yourselfMagicPix function Soft skin modeTo cancel the MagicPix function To cancel the soft skin modeWind noise reduction function To cancel fadingTo cancel the wind noise reduction function Fade in/fade out functionAspect ratio Optical image stabilizer functionGuideline function Auto slow shutter mode To cancel the slow shutter mode≥Set to Tape Recording Mode Set Advanced Auto SLW Shtr on To cancel the scene mode function Recording in various situations Scene modeRecording in natural colors White balance Manual focus adjustmentIris/gain value range Manual shutter speed/aperture adjustmentTo restore to automatic adjustment Shutter speed rangeRepeat playback To adjust the speaker volume during playbackSettings on the audio Playing back tapeFrame-by-frame playback Playback on TVTo return to normal playback Copying onto a DVD recorder or a VCR Dubbing Edit modeUsing the DV Interface Cable for Recording Digital Dubbing To cancel the standby for recordingStop playback. Player CPU Using on MacintoshPC Connection with the DV Interface Cable Operating environment on iMovie HDAdvanced REC Speed REC Stdby -38-REPEAT Play Menu listTape Recording Menu Tape Playback MenuMenus related to recording Menus related to playbackOther menus Indications Wrong Tape Format Functions that cannot be used simultaneouslyBefore requesting repair Problems and solutions Different sounds are reproduced at the same time Push the Reset Switch is displayedRemaining tape time indication disappears Indication are not shownAbout condensation About dirty headsAbout the Camcorder Do not throw old battery into fire About the batteryBe sure to detach the battery after use Prepare spare batteries when going out for recordingPeriodical check-ups About the AC adaptorAbout the cassette LCD monitor/viewfinderAuto focus White balance adjustmentExplanation of terms Automatic white balanceImage sensor SpecificationsAccessory No Description Camcorder Accessory SystemVisa Camcorder Accessory Order Form For USA CustomersRequest for Service Notice USA Only Request for Service NoticePanasonic Video Products Limited Warranty For USA CustomersNpcparts@us.panasonic.com Customer Services DirectoryAccessory Purchases Centralized Factory Service CenterWarranty Service If YOU Ship the Product to a ServicentreLimitations and Exclusions Numerics IndexSpanish Quick Use Guide Guía española para el uso rápido Reproducción de la cinta Panasonic Puerto Rico, Inc

PVGS90P, PV-GS90PL-S specifications

The Panasonic PV-GS90PL-S and PV-GS90P are compact yet feature-rich camcorders renowned for their impressive performance and user-friendly design. With their sleek aesthetic, they are designed to appeal to casual users and videography enthusiasts alike, combining portability with high-quality recording capabilities.

One of the standout features of the PV-GS90 is its 3CCD** technology, which significantly enhances color accuracy and richness. Unlike traditional single-chip systems, the 3CCD architecture allows the camcorder to capture vibrant and lifelike images by separating the light into red, green, and blue channels. This results in stunning video quality with minimal color distortion, making it a perfect choice for documenting life's special moments.

The camcorder boasts a 25x optical zoom lens, providing the versatility needed for a variety of shooting situations. Whether capturing distant subjects or creating dynamic close-ups, the Panasonic PV-GS90 delivers sharp and clear images. The built-in optical image stabilization ensures that even handheld shots maintain clarity, significantly reducing the impact of shaky hands during recording.

For those who enjoy shooting in diverse lighting conditions, this camcorder is equipped with a powerful low-light capability. The enhanced sensitivity of the 3CCD sensor allows users to capture clear images in dimly lit environments, expanding creative possibilities. Moreover, the advanced automatic exposure and white balance features help ensure optimal performance across various lighting scenarios.

Another significant advantage of the PV-GS90 series is its ease of use. The intuitive interface, complete with a flip-out LCD screen, enables users to navigate settings and review footage effortlessly. This makes it an excellent choice for beginners who are looking to explore the world of videography without being overwhelmed by complicated controls.

Additionally, the camcorders support a range of recording formats and resolutions, offering flexibility for both amateur and more serious filmmakers. With the capacity to capture both standard and high-resolution video, users can choose the setting that best suits their project needs.

In summary, the Panasonic PV-GS90PL-S and PV-GS90P stand out in the camcorder market due to their 3CCD technology, versatile zoom capabilities, low-light performance, and user-friendly design. They are ideal for anyone looking to capture life’s moments with high-quality video and ease of operation.
Top Page Image Contents