Panasonic PVGS90P To cancel Quick Start, Open the LCD monitor or extend the Viewfinder

Page 17

Before using

Quick Start

When Quick Start is ON the battery power is still being consumed, even when the LCD Monitor and the Viewfinder are closed.

The Camcorder will resume recording/pause mode about 1.7 seconds after the LCD Monitor or the Viewfinder is reopened.

≥Please note in Quick Start Mode approximately half the pause recording power is being consumed. Using Quick Start Mode will reduce the battery recording/playback time.

≥This is only activated in the following cases. ≥While using the battery

A tape is inserted, while the Tape Recording Mode is set.

≥While using the AC adaptor

Quick Start can be used even if a tape is not inserted.

≥Set to Tape Recording Mode.

1Set [SETUP] >> [QUICK START] >> [ON].

(-20-)

2Close the LCD monitor and retract the viewfinder while the mode dial is set to Tape Recording Mode.

≥The Status indicator lights green and the unit goes into quick start standby mode.

≥The Camcorder will not go into quick start standby mode unless the LCD monitor is closed and the viewfinder is retracted.

3Open the LCD monitor or extend the Viewfinder.

ªTo cancel Quick Start

1Set [SETUP] >> [QUICK START] >> [OFF].

(-20-)

≥The status indicator goes off and the power turns off if the mode dial is set to OFF while the unit is in quick start standby mode.

≥If the standby continues for approx. 30 minutes, then the Status indicator will go off and the Camcorder will be completely turned off.

≥In the following cases, quick start is canceled and the power turns off.

≥When the Mode dial is moved.

≥When the battery or AC adaptor is removed. ≥When the tape is removed while using the

battery in Tape Recording Mode.

≥When the Camcorder is quick-started with the white balance on automatic, it may take some time until the white balance is adjusted if the scene being recorded has a light source different from the scene last recorded. (When the MagicPix function is used, however, the white balance of the scene last recorded is retained.)

≥If the power is turned on in quick start standby mode, the zoom magnification becomes 2t and the picture size may differ from what it was before quick start standby mode.

≥If [POWER SAVE] (-24-) is set to [5 MINUTES] and the unit automatically goes into quick start standby mode, close the LCD monitor and retract the viewfinder and then open the LCD monitor or extend the viewfinder again.

≥The status indicator lights red and the Camcorder is put into recording pause approx. 1.7 seconds after it is turned on.

17

LSQT1284

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Model No. PV-GS90P/PC Do not Expose this Equipment to Rain or Moisture Following mark and symbols are located on bottom of the unitDeclaration of Conformity Trade Name Panasonic Model No Following Applies only in the U.S.APV-GS90P Following Applies only in CanadaImportant Safety Instructions Care Battery pack Lithium ion battery packUSE & Location AC adaptor Contents Charging the battery AccessoriesInserting the battery Quick GuidePlaying back tape How to turn on the powerRecording on a tape Viewfinder -16 Parts identification and handlingCamcorder LCD monitor -16 How to remove the Sensor tag for U.S.A. onlyPower supply Using the lens coverGrip belt Charging lamp ChargeCharging time and recordable time Connecting to the AC outletRemoving the battery ≥Rotate the mode dial slowly Selecting a mode Turning the Camcorder on/offTape Recording Mode Tape Playback ModeAbout date/time Setting date and timeRecharging the built-in lithium battery Using the viewfinder Using the LCD monitorAdjusting the viewfinder field of view Adjust the focus by sliding the eyepiece corrector knobSet Setup Quick Start OFF To cancel Quick StartQuick Start Open the LCD monitor or extend the ViewfinderWhen the cassette holder cannot be housed When the cassette holder does not come outInserting/removing a cassette Accidental erasure preventionTape playback mode How to use the joystickBasic joystick operations Joystick and screen displayUsing the menu screen Help modeTo exit the Help mode Language selectionAbout the menu setting Adjusting LCD monitor/viewfinderAdjusting the brightness and color level To exit the menu screenPress the Light button To cancel the built-in LED video lightRecording with the built-in LED video light Recording mode About auto modeCheck before recording Basic Camcorder positioningPower Save On-screen display in the tape recording modeRecording on a tape About the remaining tape time indication on the screenStopping blank search midway through Recording checkBlank search function Recording a still picture on a tape Photoshot ≥Set to Tape Recording ModeZoom in/out function Continuous photoshotBacklight compensation function Recording yourselfTo cancel the MagicPix function Soft skin modeTo cancel the soft skin mode MagicPix functionTo cancel the wind noise reduction function To cancel fadingFade in/fade out function Wind noise reduction functionGuideline function Aspect ratioOptical image stabilizer function ≥Set to Tape Recording Mode Set Advanced Auto SLW Shtr on Auto slow shutter modeTo cancel the slow shutter mode To cancel the scene mode function Recording in various situations Scene modeRecording in natural colors White balance Manual focus adjustmentTo restore to automatic adjustment Manual shutter speed/aperture adjustmentShutter speed range Iris/gain value rangeSettings on the audio To adjust the speaker volume during playbackPlaying back tape Repeat playbackTo return to normal playback Frame-by-frame playbackPlayback on TV Copying onto a DVD recorder or a VCR Dubbing Edit modeStop playback. Player Using the DV Interface Cable for Recording Digital DubbingTo cancel the standby for recording PC Connection with the DV Interface Cable Using on MacintoshOperating environment on iMovie HD CPUTape Recording Menu Menu listTape Playback Menu Advanced REC Speed REC Stdby -38-REPEAT PlayOther menus Menus related to recordingMenus related to playback Indications Wrong Tape Format Functions that cannot be used simultaneouslyBefore requesting repair Problems and solutions Remaining tape time indication disappears Push the Reset Switch is displayedIndication are not shown Different sounds are reproduced at the same timeAbout the Camcorder About condensationAbout dirty heads Be sure to detach the battery after use About the batteryPrepare spare batteries when going out for recording Do not throw old battery into fireAbout the cassette About the AC adaptorLCD monitor/viewfinder Periodical check-upsExplanation of terms White balance adjustmentAutomatic white balance Auto focusImage sensor SpecificationsAccessory No Description Camcorder Accessory SystemVisa Camcorder Accessory Order Form For USA CustomersRequest for Service Notice USA Only Request for Service NoticePanasonic Video Products Limited Warranty For USA CustomersAccessory Purchases Customer Services DirectoryCentralized Factory Service Center Npcparts@us.panasonic.comLimitations and Exclusions Warranty ServiceIf YOU Ship the Product to a Servicentre Numerics IndexSpanish Quick Use Guide Guía española para el uso rápido Reproducción de la cinta Panasonic Puerto Rico, Inc

PVGS90P, PV-GS90PL-S specifications

The Panasonic PV-GS90PL-S and PV-GS90P are compact yet feature-rich camcorders renowned for their impressive performance and user-friendly design. With their sleek aesthetic, they are designed to appeal to casual users and videography enthusiasts alike, combining portability with high-quality recording capabilities.

One of the standout features of the PV-GS90 is its 3CCD** technology, which significantly enhances color accuracy and richness. Unlike traditional single-chip systems, the 3CCD architecture allows the camcorder to capture vibrant and lifelike images by separating the light into red, green, and blue channels. This results in stunning video quality with minimal color distortion, making it a perfect choice for documenting life's special moments.

The camcorder boasts a 25x optical zoom lens, providing the versatility needed for a variety of shooting situations. Whether capturing distant subjects or creating dynamic close-ups, the Panasonic PV-GS90 delivers sharp and clear images. The built-in optical image stabilization ensures that even handheld shots maintain clarity, significantly reducing the impact of shaky hands during recording.

For those who enjoy shooting in diverse lighting conditions, this camcorder is equipped with a powerful low-light capability. The enhanced sensitivity of the 3CCD sensor allows users to capture clear images in dimly lit environments, expanding creative possibilities. Moreover, the advanced automatic exposure and white balance features help ensure optimal performance across various lighting scenarios.

Another significant advantage of the PV-GS90 series is its ease of use. The intuitive interface, complete with a flip-out LCD screen, enables users to navigate settings and review footage effortlessly. This makes it an excellent choice for beginners who are looking to explore the world of videography without being overwhelmed by complicated controls.

Additionally, the camcorders support a range of recording formats and resolutions, offering flexibility for both amateur and more serious filmmakers. With the capacity to capture both standard and high-resolution video, users can choose the setting that best suits their project needs.

In summary, the Panasonic PV-GS90PL-S and PV-GS90P stand out in the camcorder market due to their 3CCD technology, versatile zoom capabilities, low-light performance, and user-friendly design. They are ideal for anyone looking to capture life’s moments with high-quality video and ease of operation.
Top Page Image Contents