Panasonic PV-GS90PL-S, PVGS90P Using the DV Interface Cable for Recording Digital Dubbing

Page 38

Edit mode

Using the DV Interface Cable for Recording (Digital Dubbing)

By connecting other digital video equipment with DV terminal and the Camcorder by using the DV cable PV-DDC9/PV-DDC9-K (optional) 1, high- image-quality dubbing can be done in digital format.

≥Set to Tape Playback Mode. (Player/recorder)

1Connect the Camcorder and digital video equipment with the DV cable.

1

2Set [ADVANCED] >> [REC STDBY] >> [YES]. (Recorder)

3Start playback. (Player)

4Start recording. (Recorder)

Move the joystick up to select [¥/;] icon.

5Move the joystick up to select the [¥/;] icon again to stop recording. (Recorder)

6Stop playback. (Player)

ªTo cancel the standby for recording

When the Camcorder is standby for recording, move the joystick down and select the [∫] icon.

≥Do not plug or unplug the DV cable during dubbing, or the dubbing may not be completed properly.

≥If a picture (bilingual video, etc.) containing main sound and sub sound has been dubbed, select the desired sound by [SETUP] >> [AUDIO OUT] on playback.

≥Even if you use a device equipped with DV terminals such as IEEE1394, you may not be able to perform digital dubbing in some cases. For more information, see the instructions for equipment connected.

≥Regardless of the menu settings on the recorder, digital dubbing is carried out in the same mode as the [AUDIO REC] mode of the playback tape.

≥The images on the recorder monitor may be disturbed, but it does not affect the recorded images.

≥If a picture containing a copyright protection signal (copy guard) is recorded by the

Camcorder, the picture is distorted by mosaic- like patterns at playback.

≥While pictures are input from the DV terminal, the operation icon blinks on instead of appearing from the side of the screen when you press the center of the joystick.

≥While pictures are input from the DV terminal, the TV aspect will not change even if you change the setting for [TV ASPECT] in the [SETUP] menu.

CAUTION:

Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement.

38

LSQT1284

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Model No. PV-GS90P/PC Following mark and symbols are located on bottom of the unit Do not Expose this Equipment to Rain or MoisturePV-GS90P Following Applies only in the U.S.ADeclaration of Conformity Trade Name Panasonic Model No Following Applies only in CanadaImportant Safety Instructions Care Battery pack Lithium ion battery packUSE & Location AC adaptor Contents Inserting the battery AccessoriesCharging the battery Quick GuidePlaying back tape How to turn on the powerRecording on a tape Viewfinder -16 Parts identification and handlingCamcorder How to remove the Sensor tag for U.S.A. only LCD monitor -16Grip belt Using the lens coverPower supply Charging lamp ChargeCharging time and recordable time Connecting to the AC outletRemoving the battery Tape Recording Mode Selecting a mode Turning the Camcorder on/off≥Rotate the mode dial slowly Tape Playback ModeAbout date/time Setting date and timeRecharging the built-in lithium battery Adjusting the viewfinder field of view Using the LCD monitorUsing the viewfinder Adjust the focus by sliding the eyepiece corrector knobQuick Start To cancel Quick StartSet Setup Quick Start OFF Open the LCD monitor or extend the ViewfinderInserting/removing a cassette When the cassette holder does not come outWhen the cassette holder cannot be housed Accidental erasure preventionBasic joystick operations How to use the joystickTape playback mode Joystick and screen displayTo exit the Help mode Help modeUsing the menu screen Language selectionAdjusting the brightness and color level Adjusting LCD monitor/viewfinderAbout the menu setting To exit the menu screenPress the Light button To cancel the built-in LED video lightRecording with the built-in LED video light Check before recording About auto modeRecording mode Basic Camcorder positioningRecording on a tape On-screen display in the tape recording modePower Save About the remaining tape time indication on the screenStopping blank search midway through Recording checkBlank search function Zoom in/out function ≥Set to Tape Recording ModeRecording a still picture on a tape Photoshot Continuous photoshotRecording yourself Backlight compensation functionTo cancel the soft skin mode Soft skin modeTo cancel the MagicPix function MagicPix functionFade in/fade out function To cancel fadingTo cancel the wind noise reduction function Wind noise reduction functionGuideline function Aspect ratioOptical image stabilizer function ≥Set to Tape Recording Mode Set Advanced Auto SLW Shtr on Auto slow shutter modeTo cancel the slow shutter mode Recording in various situations Scene mode To cancel the scene mode functionManual focus adjustment Recording in natural colors White balanceShutter speed range Manual shutter speed/aperture adjustmentTo restore to automatic adjustment Iris/gain value rangePlaying back tape To adjust the speaker volume during playbackSettings on the audio Repeat playbackTo return to normal playback Frame-by-frame playbackPlayback on TV Edit mode Copying onto a DVD recorder or a VCR DubbingStop playback. Player Using the DV Interface Cable for Recording Digital DubbingTo cancel the standby for recording Operating environment on iMovie HD Using on MacintoshPC Connection with the DV Interface Cable CPUTape Playback Menu Menu listTape Recording Menu Advanced REC Speed REC Stdby -38-REPEAT PlayOther menus Menus related to recordingMenus related to playback Indications Functions that cannot be used simultaneously Wrong Tape FormatBefore requesting repair Problems and solutions Indication are not shown Push the Reset Switch is displayedRemaining tape time indication disappears Different sounds are reproduced at the same timeAbout the Camcorder About condensationAbout dirty heads Prepare spare batteries when going out for recording About the batteryBe sure to detach the battery after use Do not throw old battery into fireLCD monitor/viewfinder About the AC adaptorAbout the cassette Periodical check-upsAutomatic white balance White balance adjustmentExplanation of terms Auto focusSpecifications Image sensorCamcorder Accessory System Accessory No DescriptionCamcorder Accessory Order Form For USA Customers VisaRequest for Service Notice Request for Service Notice USA OnlyLimited Warranty For USA Customers Panasonic Video ProductsCentralized Factory Service Center Customer Services DirectoryAccessory Purchases Npcparts@us.panasonic.comLimitations and Exclusions Warranty ServiceIf YOU Ship the Product to a Servicentre Index NumericsSpanish Quick Use Guide Guía española para el uso rápido Reproducción de la cinta Panasonic Puerto Rico, Inc

PVGS90P, PV-GS90PL-S specifications

The Panasonic PV-GS90PL-S and PV-GS90P are compact yet feature-rich camcorders renowned for their impressive performance and user-friendly design. With their sleek aesthetic, they are designed to appeal to casual users and videography enthusiasts alike, combining portability with high-quality recording capabilities.

One of the standout features of the PV-GS90 is its 3CCD** technology, which significantly enhances color accuracy and richness. Unlike traditional single-chip systems, the 3CCD architecture allows the camcorder to capture vibrant and lifelike images by separating the light into red, green, and blue channels. This results in stunning video quality with minimal color distortion, making it a perfect choice for documenting life's special moments.

The camcorder boasts a 25x optical zoom lens, providing the versatility needed for a variety of shooting situations. Whether capturing distant subjects or creating dynamic close-ups, the Panasonic PV-GS90 delivers sharp and clear images. The built-in optical image stabilization ensures that even handheld shots maintain clarity, significantly reducing the impact of shaky hands during recording.

For those who enjoy shooting in diverse lighting conditions, this camcorder is equipped with a powerful low-light capability. The enhanced sensitivity of the 3CCD sensor allows users to capture clear images in dimly lit environments, expanding creative possibilities. Moreover, the advanced automatic exposure and white balance features help ensure optimal performance across various lighting scenarios.

Another significant advantage of the PV-GS90 series is its ease of use. The intuitive interface, complete with a flip-out LCD screen, enables users to navigate settings and review footage effortlessly. This makes it an excellent choice for beginners who are looking to explore the world of videography without being overwhelmed by complicated controls.

Additionally, the camcorders support a range of recording formats and resolutions, offering flexibility for both amateur and more serious filmmakers. With the capacity to capture both standard and high-resolution video, users can choose the setting that best suits their project needs.

In summary, the Panasonic PV-GS90PL-S and PV-GS90P stand out in the camcorder market due to their 3CCD technology, versatile zoom capabilities, low-light performance, and user-friendly design. They are ideal for anyone looking to capture life’s moments with high-quality video and ease of operation.
Top Page Image Contents