![](/images/new-backgrounds/1141006/14100647x1.webp)
Record mode
Recording on a tape
When recording, open the lens cover before turning the unit on.
The default aspect ratio is set to [16:9] for recording images compatible with a
[TV ASPECT] setting when watching them on the connected TV
≥Set to Tape Recording Mode.
1Press the recording start/stop button to start recording.
2Press the recording start/stop button again to pause recording.
;
≥For the recording time on a tape, refer to
image is recorded properly.
≥In order to find the unrecorded section, carry out the blank search
ªOn-screen display in the tape recording mode
| 1) | |
|
|
|
0h00m10s00f |
| 2) |
R 0:30 |
| |
| ||
|
|
|
1)Recording time elapse
2)Remaining tape indication
ªAbout the remaining tape time indication on the screen
≥The remaining tape time is indicated in minutes. (When it reaches less than 3 minutes, the indication starts flashing.)
≥During a
≥In some cases, the remaining tape time indication may display remaining tape time that is 2 to 3 minutes shorter than the actual remaining tape time.
ª[POWER SAVE]
[OFF]: | When 5 minutes passes without |
| any operation, the standby mode |
will be automatically set. In the standby mode, [;] blinks and it takes more time than usual to start recording after you press the recording start/stop button.
[5 MINUTES]: When 5 minutes passes without any operation, the Camcorder automatically turns off to protect the tape or to save battery life. To use the Camcorder, turn it on again.
≥In the following cases, the power may not turn off even when set [POWER SAVE] >>
[5 MINUTES].
≥When connecting to the AC outlet (When using the AC adaptor)
≥When connecting the DV cable to a PC or other equipment
24
LSQT1284