Panasonic PV-L453 Recording, Photo, Press UP or Down, Press RECORD/PAUSE to capture

	Digital Still Camera
	Before you begin...
Recording
	• Connect Camcorder to power source.
	• Insert the Memory Card (optional, page 34).

1

3, 4, 5

1Press LCD-OPEN and swing LCD monitor fully open. Adjust viewing angle.

2Set POWER to

PHOTO.

•Be sure POWER is fully turned to

PHOTO position.

3 Press MENU for

DSC MENU.

Press UP or DOWN

to select REC MODE .

4Press M.FOCUS to select NORMAL or FINE (page 49).

5Press MENU to exit.

6Press RECORD/PAUSE to capture

2image.

• As the image is processed, the status

6screens below appear.

The next image may be captured after “COMPLETED” disappears.

•Depending on the image taken, the image page remaining indication may not change, or it may be decreased by 2 images.

Special Features

Note:

•If Memory Card is not inserted, “NO CARD” appears on-screen.

Set POWER to OFF, then insert the Memory Card.

•If “CARD ERROR” appears on-screen, see page 56.

•Sound will not be recorded.

•The features below are not available

while in PHOTO mode.

• Auto Fade	• Digital Fade
• Color Digital Filter	• Digital Zoom
• Digital E.I.S.	• Still/Strobe/Wide

•MotionSensor

•Digital Wipe Mode

•Picture in Picture Wipe Title

•For sharper images, set electronic shutter to higher speed when shooting in bright conditions, such as outdoors.

WARNING:

Do not, under any circumstances, remove the card immediately after pressing the RECORD/PAUSE (during recording of an image) or while deleting. This could damage the format of the card and make it unusable.

35