Panasonic PV-L453 Digital Wipe Mode, Press Mode repeatedly for Wipe effect 1, 2, or 3 See left

Digital Still Camera

Digital Wipe Mode

Insert a captured still image into the current recording, or vice versa, in one of three wipe effects.

2MODE 4 START

3

Before you begin...

•Connect Camcorder to power source.

•Insert the Memory Card (optional, page 34).

•Set POWER to CAMERA.

1Repeat steps 1-4 on page 39 to set Picture in Picture Wipe title.

2Press (MODE) repeatedly for Wipe effect 1, 2, or 3 (See left).

•WIPE 1 will flash for a while to store the image for the wipe.

3Start recording (page 17).

4Press (START) :

once ➞ inserts captured image. twice ➞ inserts current recording

picture.

•You can freeze the wipe in progress

by pressing (START). Press

(START) again to resume wipe.

Note:

•If Memory Card is not inserted, “NO CARD” appears on-screen. Set Power to OFF, then insert the Memory Card.

•Pictures captured with other brand products cannot be used with this Camcorder.

•If “INCOMPATIBLE IMAGE” appears on- screen, the size of the captured image cannot be played back on this Camcorder.

•If “CARD ERROR” appears on-screen, see page 56.

•If Digital Wipe mode is selected, the following functions are not available: MotionSensor, Auto Fade, Digital Fade, Color Digital Filter, Digital Zoom, Digital E.I.S., Still/Strobe/Wide.

40

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com