• A still image captured on the Memory Card and the Multi image playback page number is displayed on the right side of the screen.
• If there are no recordings on the card, “NO PICTURE” appears on-screen.
4 Press or to select still image to be used.
5 Start recording (page 17).
• When recording starts, Multi image playback number disappears. Then the captured still images can be recorded along with the current picture.
• To exit from the Picture in Picture Wipe title mode, press (MODE) (page 40).
Note:
• If Memory Card is not inserted, “NO CARD” appears on-screen. Set Power to OFF, then insert the Memory Card.
• Pictures captured with other brand products cannot be used with this Camcorder.
• If “INCOMPATIBLE IMAGE” appears on- screen, the size of the captured image cannot be played back on this Camcorder.
• If “CARD ERROR” appears on-screen, see page 56.
• If Picture in Picture Wipe Title is selected, the following functions are not available: MotionSensor, Auto Fade, Digital Fade, Color Digital Filter, Digital Zoom, Digital E.I.S., Still/Strobe/Wide.
• In Picture in Picture mode, UP/DOWN will not control focus in Manual Focus mode.
39
Press MENU for MENU mode. Press UP or DOWN to select
DIGITAL EFFECTS .
Press M.FOCUS for
DIGITAL EFFECTS menu. Press UP or DOWN to select DIGITAL WIPE .
Press M.FOCUS to select ON. Press MENU twice to exit.
Picture in Picture Wipe Title
Captured still images (page 35) can be recorded along with the current picture.
Digital Still Camera
Before you begin...
•Connect Camcorder to power source.
•Insert the Memory Card (optional, page 34).
•Set POWER to CAMERA.
MODE
1
1, 2, 3, 4
2
3
5
( P - P = Picture in Picture )
Still image
Moving | Multi image playback |
Picture | page number |
Special Features