Using a SD PCMCIA Adaptor (optional)
If your PC has a PCMCIA type II slot, you can insert the Memory Card (optional) into a SD PCMCIA adaptor (optional, page 52) to transfer images, captured with this Camcorder only, to your PC.
1
2, 5
3, 4
Before you begin...
•Turn your PC on.
•Set Camcorder POWER to OFF.
Inserting a Memory Card (optional)
1Remove the Memory Card from the Camcorder (page 34).
2Hold the Memory Card so that the arrow side faces up and points toward the SD PCMCIA Adaptor. Securely insert the card into the SD PCMCIA Adaptor slot as far as it will go.
3Hold the SD PCMCIA Adaptor so that the arrow side points toward the PCMCIA type II slot of your PC (Personal Computer). Securely insert the SD PCMCIA Adaptor as far as it will go.
•Depending on the PC, it may be necessary to turn the SD PCMCIA Adaptor upside down in order to insert the card.
4To remove, push the eject button on your PC (may vary by machine) and pull the SD PCMCIA Adaptor out until it is no longer inserted in the PC (Personal Computer).
5Pull the Memory Card out of the SD PCMCIA Adaptor.
Note:
•Do not remove the SD PCMCIA Adaptor from the PC while the PC is working or while image data is being transferred between the Memory Card and the PC (including operation such as opening and storing images), this will cause irreversible damage to the memory.
•If you change file name or folder in the memory card, the images will be displayed properly on PHOTO mode.
•If your PC does not have a PCMCIA type II slot but has a USB port, you can use the optional SD USB Reader/Writer (optional, see page 52).
Please carefully read the Operating Instructions that come with the SD USB Reader/Writer before using.
Special Features
45